The LY-982FX Coating Thickness Gauge can non-destructively measure
the thickness of non-magnetic coatings (e.g., aluminum, chromium,
copper, enamel, rubber, paint, etc.) on magnetic metal substrates
(e.g., steel, iron, alloys, hard magnetic steel, etc.), including
flat surfaces and pipe inner walls.
1. Features
* Spring-guided probe with ultra-wear-resistant alloy tip ensures
consistent contact pressure and stable measurement accuracy even on
hard or rough surfaces, with a durability exceeding 500,000
measurements.
* Features a rotatable probe for expanded measurement applications.
* High speed: 0.3 seconds per measurement.
* High accuracy and stability, capable of measuring ultra-thin
coatings (1-5 μm).
* Wide measurement range with high resolution.
* Light-contact measurement achieves reliable precision.
* Automatic substrate recognition.
* Split-type design, facilitating measurements in narrow areas.
*Four display modes: Readings Only, Readings& Statistics, Readings&
Bar Graph, Readings& Run Chart.
* Statistical functions: Average (x̄), Max/Min, Standard Deviation
(σ), Count (N).
* Four calibration modes: Zero Calibration, One Point Calibration,
Two Point Calibration, Five Point Calibration.
* HD color screen with auto-rotation for multi-angle viewing.
* Supports USB connection to PCs for data acquisition and automated
report generation, facilitating efficient corporate data
management.
* Large storage capacity: 16 groups, 100 data points per group
(total 1,600).
* Upper/lower limit alarms.
2. Technical parameters
* Display: 320×240 HD color LCD
* Measurement Range: 0–1500 μm (Fe), Optional:0–3000 μm (Fe)
Resolution: 0.1 μm (0–99.9 μm) 1 μm (100–3000 μm)
* High Range: Fe: 0–5000 μm
Resolution: 0.1 μm (0–99.9 μm),1 μm (100–999 μm),0.01 mm (1.00–5.00
mm)
* Accuracy: 0–1500μm:±2%H +1μm, 1500–5000μm: ±3%H +1.5μm
* Minimum Substrate Thickness: 0.3 mm
* Minimum Curvature Radius: F:凸 1.5mm
* Measurement Modes: Single/Continuous
* Units: μm/mil
* Power Supply: 2×1.5V AA batteries or USB
* Battery Life: 15 hours (continuous use)
* Operating Conditions: -10°C to 50°C, <80% RH
* Dimensions: 134×67×38 mm
* Weight: ~80 g (excluding batteries)
3.Package list
* Main Unit ×1
* Fe Calibration Block ×1
* AA Batteries ×2 (excluded for air transport)
* User Manual ×1
* Warranty Card ×1
* Carrying Case ×1
* USB Cable ×1
* Calibration Foils (50, 100, 250, 500, 1000 μm) ×1 set
Note: For measurement ranges of 0–3000 μm and above, the instrument is
additionally equipped with 2000 μm or 4000 μm calibration
