DDC Electrical Enclosure Intelligent Energy Regulation & Management System
Product Describe:
1. Smart Grids
Real-time electricity monitoring (kWh/voltage/THD) in substations, with AMI (Advanced Metering Infrastructure) compliance.
2. Water Utilities
Leak detection + consumption analytics for municipal pipelines, supporting LoRaWAN/NB-IoT for rural areas.
3. Gas Distribution
Remote gas flow/pressure monitoring (with ATEX-certified variants for hazardous zones).
4. Multi-Utility Hubs
Integrated energy/water/gas metering in smart buildings (O&M cost reduced by 40%).
5. Renewable Energy
Solar/wind farm production metering + grid feed-in reconciliation.
Design:
| Model |
Size:W*L*D,mm |
| 1 |
300×400×160 |
| 2 |
300×400×200 |
| 3 |
300×400×250 |
| 4 |
400×500×200 |
| 5 |
400×500×250 |
| 6 |
400×500×300 |
| 7 |
400×600×200 |
| 8 |
400×600×250 |
| 9 |
500×600×200 |
| 10 |
500×600×250 |
| 11 |
500×600×300 |
| 12 |
500×700×200 |
| 13 |
500×700×250 |
| 14 |
600×700×200 |
| 15 |
600×800×200 |
| 16 |
600×800×250 |
| 17 |
600×800×300 |
| 18 |
700×900×200 |
| 19 |
700×900×250 |
| 20 |
800×1000×200 |
| 21 |
800×1000×250 |
| 22 |
800×1000×300 |
| Customize |
—— |
IP Grade:
IP 30 / IP 40 / IP54 / IP55 / IP65 / IP66
Suggestion:
For DDC energy control systems, key customization recommendations span multiple aspects: in terms of sensor & metering modules, high-energy-consuming equipment should be equipped with high-precision sensors (±0.5%) to monitor power factor and harmonics, while general areas can use economical electric meters (±1%); hazardous areas require explosion-proof types, humid environments need waterproof and anti-corrosion models, and metering interfaces should be reserved when integrating new energy sources. For control logic & algorithms, industrial scenarios should prioritize load balancing and stagger the startup of high-power equipment, commercial buildings can adjust air conditioning based on passenger flow to save 30%-40% energy, data centers should link with temperature control to avoid over-cooling, and constant-parameter systems need optimized PID parameters to shorten response time to load fluctuations. Regarding actuators & loads, frequency converters should be matched to achieve 10%-100% smooth speed regulation, independent protection circuits should be set for mixed loads, and critical facilities should link with UPS or generators to ensure core load operation during power outages. In communication & data, the system should be compatible with standard protocols to connect to upper-level systems, add 5G/LoRa modules for decentralized scenarios, and customize local storage (e.g., 6 months of data) and edge computing functions. For the cabinet & environment, outdoor use requires IP65 cabinets, high-humidity areas need IP54 cabinets with temperature and humidity control, and high-power component areas should have heat dissipation devices to keep temperature below 40°C.
Guangzhou Hengmeida Automation Technology Co., Ltd
HMD is a specialist in the research, development, and manufacturing
of industrial automation control systems, with a strong focus on
custom-built low-voltage control panels and PLC intelligent control
cabinets.
We have established strategic partnerships with leading component
manufacturers such as Siemens, Schneider, and ABB, ensuring that
every solution we deliver is built on reliable, high-performance
components. Committed to providing end-to-end electrical cabinet solutions, we
tailor-make cabinets with functionalities precisely aligned to your
unique requirements—from design to delivery, we handle it all.
Backed by a team of seasoned electricians, CAD/EPLAN-certified
designers, and expert PLC programmers, we adhere strictly to
rigorous quality management systems. This enables us to offer comprehensive one-stop services,
encompassing solution design, precision machining, and system
commissioning. Our products find wide application across smart buildings,
industrial automation, energy management, and beyond, empowering
seamless and efficient operations in diverse sectors.
