Black Weather Resistance Elastic EPDM Sponge Sheet For Air
Conditioning
Hardness is a measure of the hardness or softness of EPDM foam,
typically expressed in Shore A. Foams of different hardnesses are
suitable for different application requirements.
1.Low-hardness EPDM foam (10-30 Shore A): Flexibility and
conformability make it suitable for applications requiring tight
sealing, such as waterproof gaskets and cable seals for electronic
equipment. Low-hardness foam can conform tightly to irregular
surfaces, providing excellent sealing.
2.Medium-hardness EPDM foam (30-60 Shore A): Suitable for
applications such as shock-absorbing pads and cushioning pads for
electronic equipment. Medium-hardness foam has good elasticity and
can withstand specific pressures, making it suitable for
applications requiring both sealing and cushioning performance.
3.High-hardness EPDM foam (Shore A 60 and above): Suitable for
applications requiring high strength and durability, such as
electronic device housing seals and waterproof joints for heavy
equipment. High-hardness foam offers excellent compressive strength
and durability, ensuring long-term stability.
Specification:
EPDM(Closed cell)Physical Properties:
| Name&Model | Color | Density
(kg/m³) | Hardness
(Shore C°) | Tensile Strength
(Kpa) | Elongation
(%) | Compression Deformation
(%) | Tear Strength
(kn/m) | Size(mm) | Remarks |
| EPDM-9016 | Black | 190±15 | 25°±5 | ≥500 | ≥130 | ≤40 | ≥3.0 | 950*1900*40 | |
| EPDM-9015 | Black | 150±15 | 15°±5 | ≥400 | ≥120 | ≤45 | ≥2.0 | 1000*2000*50 | |
| EPDM-9010 | Black | 130±15 | 10°±3 | ≥350 | ≥120 | ≤35 | ≥1.8 | 1000*2000*50 | |
| EPDM-9008 | Black | 110±15 | 8°±3 | ≥350 | ≥120 | ≤35 | ≥1.8 | 1000*2000*50 | |
| EPDM-WS | Black | 150±15 | 15°±5 | ≥400 | ≥120 | ≤40 | ≥2.0 | 1000*2000*50 | Sulfur free |
| EPDM-GBZ | Black | 250-500 | 30°-50° | ≥800 | ≥130 | ≤20 | ≥5.0 | 900*1800*35 | High density |
| EPDM-GYD | Black | 600-700 | 50°-75° | ≥1200 | ≥90 | ≤10 | ≥8.0 | 600*1200*30 | High hardness |
| EPDM-SMP | Black | 300±25 | 18°±5 | ≥500 | ≥150 | ≤25 | ≥2.0 | 400*500*568 | Double sided crust |
EPDM (Open cell) Physical Property:
| Name&Model | Color | Density
(kg/m³) | Tensile Strength
(Kpa) | Elongation
(%) | Compression Deformation
(%) | Tear Strength
(kn/m) | Size(mm) | Remarks |
| EPDM-10 | Black/Red/White | 100±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*60 | |
| EPDM-10Z | Black/Red | 100±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*60 | Fire retardant |
| EPDM-20 | Black | 85±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*30 | |
The difference between EPDM ,NBR and CR rubber foam:
| Comparison of rubber foam performance parameters |
Performance | EPDM Rubber Foam | NBR Rubber Foam | CR Rubber Foam |
Aging resistance | good | poor | good |
electrical insulation | very good | poor | poor |
preservative | good | general | good |
Impact elasticity | good | general | -- |
Adhesion properties | poor | good | -- |
Oil resistance | no | very good | good |
Wear resistance | good | good | -- |
Heat resistance | very good | good | good |
Cold resistance | very good | poor | poor |
Ozone resistance | good | -- | good |
Weather resistance | very good | general | very good |
Flame resistance | no | -- | good |
Acid resistance | good | good | general |
Alkali resistance | good | good | good |
FAQ:
Q1:Do you accept customized foam products ?
We have customized production service, we can produce foam products
as per client’s requests.
Q2:How can I place an order?
1)Tell us the size details and quantity you want to order.
2)We will make PI for you.
3)Checking PI and confirm it for us, we will arrange the production
ASAP when the prepayment received.
4)We will take photos for you to confirm and then deliver the goods
soon after the balance.
5)Send the Customs Clearance Documents or tracking number to you
and track the goods for you until you get it.
Q3:How to get samples ?
Send enquiry to cissy@eco-polyfoam.com, with your details of the
foams need, we will check reply in 24 hour
