Self Adhesive Waterproof Flexible EPDM Sponge Rubber Seal For
Automotive
In the electronics industry, certain applications require EPDM foam
to be conductive, providing electromagnetic shielding or
electrostatic protection.
1.Non-conductive EPDM foam: This is a common type of foam used in
the electronics industry, primarily for sealing, vibration
reduction, and insulation, such as electronic device housing
sealing and cable sealing.
2. Conductive EPDM foam: Made by adding conductive fillers (such as
carbon black and metal particles), it exhibits excellent
conductivity. Conductive EPDM foam is not suitable for applications
such as electromagnetic shielding and electrostatic protection in
electronic devices, such as shielding gaskets and grounding point
seals in mobile phones and laptops.
Specification:
EPDM(Closed cell)Physical Properties:
| Name&Model | Color | Density
(kg/m³) | Hardness
(Shore C°) | Tensile Strength
(Kpa) | Elongation
(%) | Compression Deformation
(%) | Tear Strength
(kn/m) | Size(mm) | Remarks |
| EPDM-9016 | Black | 190±15 | 25°±5 | ≥500 | ≥130 | ≤40 | ≥3.0 | 950*1900*40 | |
| EPDM-9015 | Black | 150±15 | 15°±5 | ≥400 | ≥120 | ≤45 | ≥2.0 | 1000*2000*50 | |
| EPDM-9010 | Black | 130±15 | 10°±3 | ≥350 | ≥120 | ≤35 | ≥1.8 | 1000*2000*50 | |
| EPDM-9008 | Black | 110±15 | 8°±3 | ≥350 | ≥120 | ≤35 | ≥1.8 | 1000*2000*50 | |
| EPDM-WS | Black | 150±15 | 15°±5 | ≥400 | ≥120 | ≤40 | ≥2.0 | 1000*2000*50 | Sulfur free |
| EPDM-GBZ | Black | 250-500 | 30°-50° | ≥800 | ≥130 | ≤20 | ≥5.0 | 900*1800*35 | High density |
| EPDM-GYD | Black | 600-700 | 50°-75° | ≥1200 | ≥90 | ≤10 | ≥8.0 | 600*1200*30 | High hardness |
| EPDM-SMP | Black | 300±25 | 18°±5 | ≥500 | ≥150 | ≤25 | ≥2.0 | 400*500*568 | Double sided crust |
EPDM (Open cell) Physical Property:
| Name&Model | Color | Density
(kg/m³) | Tensile Strength
(Kpa) | Elongation
(%) | Compression Deformation
(%) | Tear Strength
(kn/m) | Size(mm) | Remarks |
| EPDM-10 | Black/Red/White | 100±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*60 | |
| EPDM-10Z | Black/Red | 100±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*60 | Fire retardant |
| EPDM-20 | Black | 85±15 | ≥100 | ≥200 | ≤3.1 | ≥0.5 | 1000*2000*30 | |
The difference between EPDM ,NBR and CR rubber foam:
| Comparison of rubber foam performance parameters |
Performance | EPDM Rubber Foam | NBR Rubber Foam | CR Rubber Foam |
Aging resistance | good | poor | good |
electrical insulation | very good | poor | poor |
preservative | good | general | good |
Impact elasticity | good | general | -- |
Adhesion properties | poor | good | -- |
Oil resistance | no | very good | good |
Wear resistance | good | good | -- |
Heat resistance | very good | good | good |
Cold resistance | very good | poor | poor |
Ozone resistance | good | -- | good |
Weather resistance | very good | general | very good |
Flame resistance | no | -- | good |
Acid resistance | good | good | general |
Alkali resistance | good | good | good |
FAQ:
Q1:Do you accept customized foam products ?
We have customized production service, we can produce foam products
as per client’s requests.
Q2:How can I place an order?
1)Tell us the size details and quantity you want to order.
2)We will make PI for you.
3)Checking PI and confirm it for us, we will arrange the production
ASAP when the prepayment received.
4)We will take photos for you to confirm and then deliver the goods
soon after the balance.
5)Send the Customs Clearance Documents or tracking number to you
and track the goods for you until you get it.
Q3:How to get samples ?
Send enquiry to cissy@eco-polyfoam.com, with your details of the
foams need, we will check reply in 24 hour
