1Ch POTS(FXO/FXS)Telephone over Fiber Mux
1Ch POTS Telephone over Fiber Overview
The E-Link Single Channel POTS-to-Fibre Converter transmits traditional telephone signals (POTS)
via optical fibre, extending your telephone service far beyond the
reach of standard copper wiring.
This compact extender uses reliable RJ-11 connectors to seamlessly integrate with existing
telephone equipment. Two models are available: the FXO type
connects to a central office
(PSTN) or PBX line and can detect ringing voltage; the FXS type
connects directly to
a standard telephone device and acts as the line provider. This
solution is ideal for securing
and extending critical voice communications on campuses, in remote
buildings and in industrial facilities.
1Ch POTS Telephone over Fiber Features
- Standard RJ11 telephone interface for easy connectivity
- 1 voice channel with support for Caller ID and Fax functions
- Dual voice port design (O port & S port):
- O port connects to the switch
- S port connects to the user’s phone
- Compatible with FXO/FXS standard telephones
- Supports point-to-point, cascaded, and distributed networking without SNR degradation
- Fiber optic power link with LED indicators for real-time system status monitoring
- Industrial-grade, modular design ensures flexibility, stability, and reliability
1Ch POTS Telephone over Fiber Technical Indexes
Product Name | 1 channel telephone over fiber converter |
Product Model | LNK-PCM01 Series |
Description | FXO/FXS Ordinary telephone |
Telephone Ports | 1 telephone port RJ11 port |
Switch Terminal | Ordinary telephone or PBX, PBX (PBX),
public telephone outside the PSTN |
FXS | Ringing voltage: 75V, ringing frequency: 25HZ |
FXO | Second line input impedance:600Ω (hook),
return loss: 40db,
ring detection voltage:35V |
Ring detection frequency | 17HZ-60HZ,
second-line input impedance: 600Ω(hook),
return loss: 40 db |
Broadband Voice | 8KHZ |
Connection | Point to point,
telephone to telephone, telephone to switch |
Code | PCM code |
Fiber Ports | FC/UPC |
Ethernet Ports (optional) | Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible with IEEE 402.3, IEEE 402.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, support Auto-MDIX |
Transmission distance | Single-mode single fiber 20KM |
Environmental Specifications | Operating Temperature: -35°～ 75°C |
Storage Temperature: -40°～ 45°C |
Operating Humidity: 0%～95%, non-condensing |
Total power consumption | 2.5w(Input:DC12V 1A) |
Power supply | External power supply,
Input:AC110-40V 50/60Hz,
Output:12V 1A |
1Ch POTS Telephone over Fiber Ordering Information
Model | Description |
LNK-PCM01 | Analog Telephone to F/O Converter: 1-Ch Telephone lines (FXO & FXS), FC, Single Mode(9/125µm), 20KM,
DC12V, used by pairs |
LNK-PCM01-E | Analog Telephone to F/O Converter: 1-Ch Telephone lines (FXO & FXS) + 1-Ch 100M Ethernet, FC, Single
Mode(9/125µm), 20KM, DC12V, used by pairs |
1Ch POTS Telephone over Fiber Application
After-Sales and Warranty Policy
It is composed of online customer service and telephone customer service, providing product consultation,
remote technical support, maintenance and acceptance services.
Service Policy: Three-month replacement and three-year warranty.
Replacement: Within three months of purchasing a series of products, after
testing the product failure
by technicians and man-made damage caused by non-natural disasters,
the purchaser can directly
go to the purchasing point to replace the same type of products.Or
a product of comparable performance.
If there is no trouble in product testing, the original sample will
be returned.
Warranty: Man-made damage caused by non-natural disasters, our company's
free warranty period is 1 year.
[The following circumstances do not fall within the scope of
replacement and free maintenance]
1.Damage caused by operation and maintenance not in accordance with
the instructions in the product manual.
2.Damage caused by human factors, such as inappropriate voltage
input, water intake and breakage.
3.Damage to products caused by natural disasters, such as
lightning, earthquakes, fires, etc.
3.Unauthorized alteration of the inherent settings or repair
without the company's permission.
4.Products beyond the scope of free maintenance.
5.Damage caused by transportation, loading and unloading during
repairs sent by customers.
6.The product bar code or model on the product warranty card does
not conform to the product itself.
7.Failure or damage caused by other non-product problems such as
design, technology, manufacturing and quality.
