| Specifications | Details |
| Pressure Type | Compound Pressure |
| Rated Pressure Range | -100 ~ 1,000 kPa; -100.0 ~ 100.0 kPa |
| Set Pressure Range | -103 ~ 1,030 kPa; -103.0 ~ 103.0 kPa |
| Withstand Pressure | 1.5 MPa; 500 kPa |
| Applicable Gas | Air, non - corrosive, non - flammable gas |
| Minimum Display Unit | kPa: 1; 0.1 |
| MPa: -; - |
| kgf/cm²: 0.01; 0.001 |
| bar: 0.01; 0.001 |
| psi: 0.1; 0.01 |
| inHg: -; 0.1 |
| mmHg: -; 1 |
| Power Supply Voltage | 12 - 24 VDC ± 10%, Ripple P - P ≤ 10% |
| Current Consumption | ≤ 30 mA (no load) |
| Control Output | Output Type: NPN or PNP collector open output |
| Load Current: ≤ 125 mA |
| Internal Pressure Drop: ≤ 1.0 V |
| Response Time: ≤ 2.5 ms (False operation prevention function: 25
ms, 100 ms, 250 ms, 500 ms, 1000 ms, 1500 ms optional) |
| Display | Display: White (Sampling speed: 200 ms, 500 ms, 1000 ms optional) |
| Display Accuracy: ± 1% F.S. ± 1 digit (Ambient temperature
reference 25 ± 3°C) |
| Repeat Error: ± 0.3% F.S. ± 1 digit |
| Operation Indicator Light: White |
| Operating Environment | Protection Grade: IP 40 (IEC specification) |
| Operating Ambient Temperature: 0 ~ 50°C |
| Temperature Characteristics: ± 2% F.S. compared to reference
temperature 25°C (within 0 ~ 50°C temperature range) |
| Storage Temperature: -10 ~ 60°C (not condensed, not frozen) |
| Operating and Storage Humidity: 35 ~ 85% RH (not condensed) |
| Withstand Voltage: 1,000 VAC ~ 1 minute (wire and housing) |
| Insulation Resistance: ≥ 50 MΩ (500 VDC) (wire and housing) |
| Anti - Vibration: Vibration 1.5 mm or 10 G, 10 Hz ~ 150 Hz ~ 10 Hz
for 1 minute, X, Y, Z directions for 2 hours each |
| Anti - Impact: 100 m/s² (10 G), X, Y, Z directions 3 times each |
| Connector Specification | Lead wire (oil - resistant PVC, Ø4 mm, 3 cores, 0.15 mm²) |
| Pressure Port | R1/8 |
| Material | Front Housing: PA66 + G15%, Rear Housing: PA66 + G15%, Pressure
Port: Brass - Nickel Plated |
| Certification | CE |
| Weight | ≈ 62 g (including 2m wire) |
