The CP series can minimize equipment costs to the greatest extent.
• For example, the simple positioning required for conveyor belt
control, assembly devices, packaging machines, etc., the
measurement and length measurement of high - speed counters, and
the serial communication control of frequency conversion control
are all controlled by the CPU alone, which can minimize equipment
costs.
Simple Multi - Servo Control
• The CP series includes the CP1E - N type which is low - cost and
equipped with 2 - axis pulse output, and the CP1H type equipped
with 4 - axis pulse output. In addition, the CP1L, including the CP1L - EM1 type with a
standard Ethernet port, can perform 2 - axis pulse output. You can select the corresponding CPU according to the number of
servo motors required by the device.
• Simple Frequency Conversion Control
Using the built - in Modbus - RTU communication master station
function, frequency conversion control can be easily realized. For example, when you want to connect an inverter through RS - 485
serial communication and directly set the frequency of the
frequency conversion control device and the speed of the conveyor
belt from the programmable controller, there is no need to care
about the protocol. You only need to send commands to control the inverter. In addition, after combining the high - speed counter function, it
can also be used for applications such as controlling the label
feeding amount.
