Space-Optimized MDF Kit Valve Activator for Legacy Machinery Retrofitting with Modular Installation Design
Product Description :
Breathe new life into aging MDF lines with our Space-Optimized MDF Kit Valve Activator – engineered for retrofit installations where clearance is
measured in millimeters. This low-profile valve driver packs full actuation power into a revolutionary 68mm-diameter
housing, fitting machinery cavities inaccessible to standard
actuators. The modular retrofit kit features articulated mounting arms and flexible pneumatic routing,
enabling installation around obstructions without cutting existing
structures. Despite its compact footprint, this high-torque micro-actuator delivers 22Nm of rotational force – sufficient to operate stuck
resin valves in high-viscosity conditions. Corrosion-resistant
composite construction withstands alkaline cleaning agents, while
quick-disconnect couplings allow module replacement in under 3
minutes during shift changes. Validated on 1990s-era Siempelkamp
presses and Dieffenbacher lines, this solution eliminates $250k+
machinery upgrades through smart spatial engineering. Includes
laser-aligned mounting templates and AR-assisted installation
guides via smartphone.
Bullet Points:
Ultra-compact MDF Kit Valve Activator (68mm Ø × 120mm L)
Modular retrofit kit with 360° adjustable mounting brackets
Generates 22Nm torque at 80 PSI air supply
Tool-less cartridge replacement in <3 minutes
Compatible with legacy Burkert, ASCO, and Norgren valves
Specific Application Scenario:
Retrofitting glue valve control on 1996 Bison press within 75mm
clearance between hydraulic lines and heated platens.
FAQ:
Q: Minimum clearance required for this low-profile valve driver?
A: 70mm diameter × 125mm depth operational space.
Q: Can the modular retrofit kit adapt to non-standard valve
orientations?
A: Yes – articulated arms accommodate ±45° angular misalignment.
Q: Torque output with low air pressure (60 PSI)?
A: 16Nm – sufficient for most standard resin valves.
Q: Compatibility with steam-filled environments?
A: IP67-rated with 120°C intermittent steam resistance.
Q: Retrofit time for 8-valve station?
A: Average 2.5 hours with provided templates vs. 12+ hours for
conventional actuators.
