Product Description:
YJJ AFM0200 Gas Micro-Flow Thermal Type Sensor And Oxygen Air Flow
Quality Sensor Is Used In Equipment Such As Wire Bonding Machines
Features:
AFMO200 Micro Flow Sensor
Resistant to high and low temperatures, with good linearity, and
fast response time
AFM0200 is a thermal mass flow sensor specifically developed for
precise measurement of gas micro-flow. It calculates the mass flow
of the measured gas by measuring the resistance change. The sensor
uses an independently developed MEMS mass flow chip, featuring
intuitive, precise, stable, resistance to high and low
temperatures, good linearity, and fast response time. Moreover,
AFM0200 is equipped with built-in temperature compensation, and has
advantages such as high integration and high cost-effectiveness.
The product is small in size and suitable for various scenarios
requiring the measurement of gas flow. The micro flow sensor has
undergone strict factory calibration and directly outputs the
detected flow, reducing the user's usage cost and the difficulty of
secondary development.
AFM0200 has a wide range of application scenarios, applicable to
the measurement and control of inhalation flow in gas detection
instruments and air samplers; blow-off and cooling flow management
in welding machines and other equipment; application scenarios such
as adsorption and installation confirmation of micro electronic
components and optical components.
Gas micro-flow sensor
Power supply: 12 - 24V
Measurement range: 0 - 500 mL/min -1~1, -3~3L/min
Accuracy: ±5% of full scale
Repeatability: ±3% of RD
Working pressure range: -100 to 200 kPa
Output mode: Analog signal 1 to 5V DC
Dimensions: 33.5 * 18.2 * 10.5 mm
Specifications:
| Power supply | 12 - 24V |
| Temperature | -40℃ ~ +80℃ |
| Response time | ±3% of RD |
| Output mode | Analog signal 1 to 5V DC |
