Product Description:
YJJ AZDM01 Turbidity Sensor Is Used For Water Quality Monitoring
And For Monitoring Turbidity Of Wastewater
Features:
AZDM01 is an optical turbidity sensor that outputs analog signals.
It uses an infrared light-emitting source to emit light through the
liquid to be tested. The light intensity signal is received by the
phototransistor and converted into a voltage signal for output. The
product housing is equipped with a waterproof design. This ensures
that the product has extremely high reliability and excellent
long-term stability. This optical turbidity sensor has features
such as waterproof housing, fast response, high reliability and
stability, low cost, and simple driving circuit.
Turbidity module is a sensor module that measures impurities in
water. It measures the light transmittance and scattering rate of
suspended particles in water by measuring the change in the total
suspended solids (TSS) in the water. Using light, it detects
suspended particles. As the TSS increases, the level of liquid
turbidity also increases.
[Product Parameters]
Operating Voltage: 5V DC
Operating Current: 40MA (MAX)
Response Time: < 500MS
Insulation Resistance: 100M (MIN)
Analog Output: 0 - 4.5V
Digital Output: High/Low Level Signals
(You can adjust the threshold by changing the potentiometer)
Power supply voltage: 5V DC (4.8 - 5.5V)
Minimum power supply current: 20MA
Typical power supply current: 25MA
Maximum power supply current: 50MA
Typical power: 125MW
Sampling period: >100MS/each time
Output mode: Analog signal, reference recommended driving circuit
Preheating time: >100 milliseconds
Operating temperature: 4'C - 85°C
35,0 + 0.5
Operating humidity: 0 - 95%RH
Life: >10 years (at 25 degrees)
Specifications:
| Sampling period | >100MS/each time |
| Temperature | -40℃ ~ +80℃ |
| Operating humidity | 0 - 95%RH |
| Temperature | ±0.5℃ |
