Power Supply Unit - Centralized Power Supply |
Flexible Power Supply | AC110~220V (Optional) |
AC24V (Optional) |
DC48V (Optional) |
DC36V (Optional) |
DC24V (Optional) |
DC12V (Optional) |
Air Switch | Support (Optional) |
Circuit Breaker | Support (Optional) |
Functions | over-current, over-voltage, short-circuit protection |
Power Supply Unit - Automatic Reclosure |
Short-circuit protection | Automatic reclosing leakage protector will cut off within 0.1s to
guarantee equipment safety when current exceeds 3 times of rated
current. |
Electric leakage protection | Leakage initiating current is 30mA. Automatic reclosing leakage
protector will cut off by -30m under electric leakage of 15～30mA. |
Over-current/overload protection | Automatic reclosing leakage protector will maintain the current
duration and value when current exceeds 1.15 times of rated
current; |
Over-voltage protection | Automatic reclosing leakage protector will cut off if supply
voltage exceeds 280V±5V. (It can be adjusted according to user needs.) |
Under-voltage protection | Automatic reclosing leakage protector will cut off if supply
voltage is less than 150V±5V. (It can be adjusted according to user needs.) |
Detection before switching on | Automatic reclosing leakage protector will detect line voltage
before switching on. |
Automatic reclosure | Automatic reclosing leakage protector will cut off instantly in
case of line danger due to transient electric leakage or transient
shock (such as thunder or socket arcing, etc) |
Manual ON/OFF performance | Zero line shall be disconnected to firing line without output
during electric leakage when pressing test key manually; |
Data Acquisition and Remote Control |
Detection function of cabinet status | l Temperature/humidity detection l Cabinet door status detection l Illuminance detection in the Cabinet l Water leakage monitoring of the Cabinet |
Equipment detection functions in the cabinet | l Fan operation status detection l Status detection of lightning protector l 220V strong current detection l Status detection of circuit breaker |
Remote control function | l Alarm light brightness control l Fan control l Lighting lamp control l Circuit breaker control |
Fiber Optical Communication Unit |
Fiber | 1~2-Port 100M or 1000M Fiber Port |
Ethernet | 4~9-Port 10/100M or 10/100/1000M Ethernet Port |
Protocols | TCP/IP, PPPOE, DHCP, ICMP, NAT |
Standards | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3u 100Base-FX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-SX/LX IEEE 802.3x Flow Control |
Lightning Protection |
Strong protection capability | AC 220V strong current lightning protection module has surge
leakage ability of the maximum discharging current, namely, 40kA
(8/20us); Network lightning protection has voltage protection level
Up: line-earth: 600V; line-line: 25V; It can bear C2:5kV/2.5kA
complex wave test. |
AC 220V lightning protection unit characteristics | Embedded transient over-current circuit breaker, telecommand alarm connector, invalidation detection indication, overheating circuit breaker, standard modular installation. |
Cabinet Unit (Mechanical) |
Material | Cold-rolling plate |
Thickness | 2.0mm |
Protection level | IP55 |
LCD display content | Temperature, humidity, current, voltage |
Accessories | Fan, LED lighting lamp, mechanical case door status detection
switch, optical fiber fusion splice protector, optical fiber
coupler |
Installation | Floor-type or Rod-type |
Environmental |
Operating Temperature | -20°C to 70°C (-4°F to 158°F) |
Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity | 5% to 95% non-condensing |
MTBF | > 200,000 hrs |
Regulatory Approvals |
ISO9001 |
EN55022:2010+AC: 2011, Class A |
EN 61000-3-2: 2006+A1: 2009+A2: 2009 |
EN 61000-3-3: 2013 |
EN55024:2010 |
IEC 61000-4-2: 2008 (ESD) |
IEC 61000-4-3: 2010 (RS) |
IEC 61000-4-4: 2012 (EFT) |
IEC 61000-4-5: 2014 (Surge) |
IEC 61000-4-6: 2013 (CS) |
IEC 61000-4-8: 2009 (PFMF) |
