Industrial 1~4Ch RS232/RS422/RS485 Serial Fiber Media Converter
Industrial 1~4Ch RS232/RS422/RS485 Serial Fiber Media Converter Advantages
► Based on proprietary integrated circuit;
► Provide 1-4 independent serial ports (RS232/422/485 optional)
channel, physical isolation from each other, there is no
correspondence between the
► RS232 / 485/422 interface, optional three data, RS232 supports
3-wire RS232 (TXD, RXD, GND), flow control support CD, DSR, CTS,
► RS232 /485/422 channels can be transmitted from 0-115200 baud
asynchronous serial data adaptive
► Serial port interface lightning reach IEC61000-4-5 (8 / 20μS)
differential mode: 6KV, impedance (2Ω); Common mode: 6KV, impedance
(2Ω) standard
Industrial 1~4Ch RS232/RS422/RS485 Serial Fiber Media Converter Overview
The converter is designed to provide the most versatile connection
possible between two RS-232/422/485 serial equipment using fiber
optic cable. It allows any two pieces of serial equipment to
communicate full-duplex over typical duplex fibers, or over
optional single fiber up to 20km. The Din-rail mountable design
makes it ideal for industrial cabinets and enclosures. For
industrial environment, the converters are designed with the
following enhanced features exceeding that of commercial media
converters:
Industrial 1~4Ch RS232/RS422/RS485 Serial Fiber Media Converter Technical Indexes
Fiber |
Multi-mode Fiber:50/125um, 62.5/125um |
Maximum transmission distance | 2Km @ 62.5/ 125um multi mode |
fiber, attenuation (3dbm/km)Wave Length | 820nm |
Transmitting power | -12dBm (Min) ~-9dBm (Max) |
Receiver sensitivity | -28dBm (Min) |
Link budget | 16dBm |
Single-mode Fiber:8/125um, 9/125um |
Maximum transmission distance | 20Km |
Transmission distance | 20Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) |
Wave Length | 1310nm |
Transmitting power | -9dBm (Min) ~-8dBm (Max) |
Receiver sensitivity | -27dBm (Min) |
Link budget | 18dBm |
RS232/422/485 Interface |
Rate | 0-115200Kbps |
Interface characteristics | EIA RS232 RS422 RS485 |
Connector | Phoenix terminal |
Working environment |
Working temperature | -40°C ~ 75°C |
Working Humidity | 5%~95 % (no condensation) |
Storage temperature | -40°C ~ 80°C |
Mechanical: |
Dimensions | 133mm×40mm×120mm (H×W×D) |
Casing | IP30 protection, Metal case |
Installation | 35mm DIN-Rail, Wall Mounting |
Weight | 685g |
Industrial 1~4Ch RS232/RS422/RS485 Serial Fiber Media Converter Ordering Information
LNK-GYS101 | Industrial 1Ch RS232, RS22 or RS85 Serial Fiber Media Converter: 1xOptical port+1xRS232/RS485/RS422 port (Default FC, SFP or SC Fiber port optional) |
LNK-GYS102 | Industrial 2Ch RS232, RS22 or RS85 Serial Fiber Media Converter: 1xOptical port+2xRS232/RS485/RS422 port (Default FC, SFP or SC Fiber port optional) |
LNK-GYS104 | Industrial 4Ch RS232, RS22 or RS85 Serial Fiber Media Converter: 1xOptical port+4xRS232/RS485/RS422 port (Default FC, SFP or SC Fiber port optional) |
