8-port 10/100BASE-T PoE and 2-port 100BASE-T Uplink Ethernet Switch
8-port 10/100BASE-T PoE and 2-port 100BASE-T Uplink Ethernet Switch
Advantages
· 8*10/100M RJ45 POE port+2*10/100M RJ45 uplink port
· Support IEEE802.3, IEEE802.3U, IEEE802.3af/at
· Ethernet port support 10/100M and POE function
· Flow control: Full-duplex:IEEE802.3x,Half-duplex:Back pressure
· Support port auto MDI/MDIX
· With storing-and-forwarding mode
Overview
LNK-208 Series PoE Switch is equipped with 8-port 10/100BASE-TX PoE
and 2-port 100Base-T uplink. LNK-208 Series PoE switch can automatically detect and supply power with
those IEEE 802.3af/at compliant Powered Devices (PDs). With DIP switch Extend mode to support 250 meters long distance
transmission (Cat.6 cable). There is no need to worry about the damage of standard POE or
Non-POE device, it will be power off when the POE Device is not connecting.
In this situation, the electrical power is transmitted along with
data in one single cable allowing you to expand your network where
there are no power lines or outlets, where you wish to fix devices
such as APs, IP Cameras or IP Phones, etc.
Technical Indexes
Product name | 10-Port 10/100 Ethernet Switch with 8 PoE ports |
Model | LNK-208 Series |
Port | 8x 10/100M RJ-45 POE port, 2x10/100M RJ-45 uplink port |
Network protocol | Support IEEE802.3, IEEE802.3u, IEEE802.3x,IEEE802.3af/at |
POE parameter | PoE standard: IEEE802.3af /IEEE802.3at |
| Each port power: 15.4 W (IEEE 802.3af) Each port power: 30 W (IEEE 802.3at) |
| PoE compatibility: IEEE 802.3af/at adaptive |
| POE output voltage: DC48V |
| POE power pin:1/2+; 3/6- |
DIP switch | Extend ON: 250 meters transmission OFF: 100 meters |
Network media | 10Base-T: Cat3 or later UTP/STP(≤100m) 10Base-T: Cat6 or later UTP/STP(≤250m) 100Base-TX: Cat5 or later UTP/STP(≤100m) |
Performance | Bandwidth: 2Gbps(non-blocking) Packet forwarding rate: 0.1488M pps/port Cache: 448K MAC address table: 1K |
Ordering Information
Model | Description |
LNK-208 | 8x10/100M RJ45 PoE ports + 2x10/100M RJ45 uplink ports PoE Switch,
IEEE802.3af / IEEE802.3at PoE standard,
AC110-260V Power Input |
