Test Type | Test Item | Target | Reference |
Electrical Characteristics | Differential Mode RL(SDDII) | 0.01<f<4.1 ; < -12+2*SQRT(f ) 4. 1<f<11. 1 ; <-6.3+13*log10(f/5.5) Where f is in GHz Measurements units: dB | SFF 8431 |
Common mode return loss (SCCII) | 0.01<f<2.5 ; <-7+1.6(f ) 2.5<f<11.1 ; <-3 Where f is in GHz Measurements units: dB | SFF 8431 |
NEXT | <-26dB from 1MHz to 11GHz | / |
Cable assembly Impedence | 100+/ -100hm Rise time of 30 ps (20 %- 80 %) | (20%~80 %) |
Insertion Loss Deviation | -1dB≤ILD≤1dB 300KHz≤f≤6GHz | / |
Environmental Characteristics | Operating Temperature | -40~85°C | Cable operating temp. range |
Thermal Shock | Electrical performance meet the specification requirement | EIA-364-32D. Method A. TC-1. -55 10 85C,100 cycles, 15 min, dwells |
Cyclic Temp. & Humidity | Electrical performance meet the specification requirement | EIA-364-31 Method III,Test Cond A |
Salt spray | 48 hours salt spraying after shell corrosive area less than 5% | EIA-364-26 |
Temperature Life | Performance meets the specification requirement | EIA-364-17B w/ RH, Damp heat 85C at 85% RH for 500 hours |
Mechanical Characteristics | MechanicaI Vibration | Performance meets the specification requirement | EIA-364-28E.11 TC-VII, Test Cond. D 15minutes in X,Y,Z axis. |
Cable Plug Retention in Cage | 90N Min. | No functional damage to cable plug below 90N. Per SFF-8432 Rev 5.0 |
Cable Retention in Plug | 90N Min. | EIA-455-6B |
Mechanical Shock | Performance meets the specification requirement | Clamp and Shock per EIA-364-27B, TC-G, 3times in 6directions, 100g,
6ms |
Cable plug Insertion | 18N(Max.) | SFF-8432 Rev 5.0 |
Cable plug extraction | 12.5N(Max.) | SFF-8432 Rev 5.0 |
Durability | 50 Time. No evidence of physical damage | EIA-364-09; perform plug&unplug cycles Plug and Receptacle mate rate: 250times/hour |
