STM-1 over GE TDM over IP Multiplexer
Product Advantages
· Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support
IP/UDP.
· Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports
serve as network uplinks or users ports, Anyone of 5 GE electrical
ports may act as NM port
· User-friendly Web server supported for easy setup and maintenance
· Support SNMP V1/V2 network management
· STM-1 card has 2 port, support local clock, STM-1 line clock and
external clock.
· Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q
based and QinQ based), QoS(port based,8021.1P based,MAC based and
TOS based).
· Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring
protection, OAM and MAC address automatic learning
· Ethernet packet size up to 9720byte
Overview
LNK-STM1-GE realize STM-1 over Gigabit Ethernet service,which is a cost
effective solution for the traditional telecom services migrate to
the IP packet network. LNK-STM1-GE adopts the innovative TDM over
IP technology, with IP circuit emulation that supports
transportation of 1xSTM-1(63 E1/VC-12) over GE port.
Item | Description |
Model | LNK-STM1-GE | 2 PWR slots 1 STM-1 slot 1 Ethernet uplink slot 1 External clock interface |
Service card | Ethernet uplink card | 5 GE electrical ports and 1 GE optical port Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x Speed and duplex auto-negotiation or manual |
| STM-1 card | 2 port Default SC/PC |
Power | Supply | 2 power slots |
| | AC 220v power module |
| | AC 110v power module |
| | DC -48v power module |
| Consumption | ≤40W |
Working Environment | Temperature | 0~ 50°C |
| Relative Humidity | ≤90% (non-condensing) |
Dimension | W x H x D (mm): | 1U: 440 x 44 x 231 (mm) |
