16E1 + 4FE PDH Multiplexer
Advantages
· Provides 16E1 transparent transmission ;
· With char 16*2 LCD display and SNMP agent inside.
· Provide Console manage interface(RS232)
· Provide two fiber interface 1+1 protect function ,and ALS(Automatic
Laser Shutdown/Reduction)function
· Provide 4*100M wire-speed Ethernet channel,support mutual
negotiate, Ethernet bandwidth is set on base on multiple of 32K.;
· Provice one hotline channel for option;
· Provide two fiber interfaces, one as master, the other as slave,
insuring uninterrupted service transmission.
· The rate of optical port is 155Mbps, transmission range can reach
25KM, 40KM, 60KM, 80KM or 100KM;
· E1 interface code is HDB3,E1 vibration characteristic conforms to
ITU-T G.703,G.823 and G.742;
· Ethernet port supports full/half duplex, 10M/100M auto-ataptable;
· Ethernet port supports VLAN function and has 4 devision mode for
user selection;
· Ethernet package size support 1916 byte and 4 Ethernet port could
be set seperately;
· Has complete alarm function and can monitor remote device status;
· Supports two Fiber Loop-back,and Four E1 loop-back mode,and manage
device conveniently;
· user configurable main alarm and minor alarm, display in LCD and
sound alarm at speaker;
· The combination AC110V,AC220V and DC-48V for redundant
Overview
This device provides 1-16Channel E1 interface, 1-4Channel 10M/100M Ethernet
interface (Line Rate 100M) and 2 expansion interface. 4Channel
Ethernet interface is switch interface, can support VLAN. 1
expansion interface can be used as the transmission channel of
RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M
audio signal, switch signal, Ethernet signal (Bandwidth 2M). It is
very flexible. It has alarm function. The work is reliable, stable,
and low power consumption, high integration, and small size.
Technical Indexes
Parameter | Specification |
Multi-mode Fiber |
Fiber Type | 50/125um, 62.5/125um |
Maximum transmission distance | 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave
Length: 820nm |
Transmitting power | -12dBm (Min) ~-9dBm (Max) |
Receiver sensitivity | -28dBm (Min) |
Link budget | 16dBm |
Single-mode Fiber |
Fiber Type | 8/125um, 9/125um |
Maximum transmission distance | 40Km |
Transmission distance | 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) |
Wave Length | 1310nm |
Transmitting power | -9dBm (Min) ~-8dBm (Max) |
Receiver sensitivity | -27dBm (Min) |
Link budget | 18dBm |
E1 Interface |
Interface Standard | comply with protocol G.703 |
Interface Rate | n*64Kbps±50ppm |
Interface Code | HDB3 |
E1 Impedance: | 75Ω (unbalance), 120Ω (balance) |
Jitter tolerance | In accord with protocol G.742 and G.823 |
Allowed Attenuation | 0~6dBm |
Ethernet Interface (10/100M) |
Interface rate | 10/100 Mbps, half/full duplex auto-negotiation |
Interface Standard | Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
MAC Address Capability | 4096 |
Connector | RJ45, support Auto-MDIX |
Power |
Power supply | AC180V ~ 260V；DC –48V；DC +24V |
Power consumption | ≤10W |
Dimension |
Product size | 19 inch 1U 485X138X44mm(WXDXH) |
Simple packaging | 522X198X82mm(WXDXH) |
Piece weight | 3KG |
Working environment |
Working temperature | -10°C ~ 50°C |
Working Humidity | 5%~95 % (no condensation) |
Storage temperature | -40°C ~ 80°C |
Storage Humidity | 5%~95 % (no condensation) |
Application
