Space-saving High Efficiency 4-Channel Dispensing Controller for
VCM application
KDC3004 Automatic dispensing controller is a four-channel time pressure dispensing controller. It is
designed for customers' application scenarios where multiple glue
barrels are juxtaposed for collaborative dispensing. There is no
need to stack multiple conventional single-channel dispensing
controllers. The total space occupied by the four-channel
dispensing controller is significantly reduced. It is connected to
an air supply pipeline and power supply to facilitate quick pipe
routing. At the same time, each channel retains completely
independent parameter settings and glue dispensing and suction
pressure adjustment function.
Core Advantages
1. With high consistency and high precision, the KDC3004 dispensing
controller can handle the electronics, automotive industry or other
demanding dispensing processes.
2. A variety of control methods can realize 4-channel dispensing
control and simple control of single channel and channel
combination.
3. Full digital settings and display make settings simpler and more
accurate.
4. The anti-drip function can effectively prevent liquid dripping
and ensure the consistency of glue volume or glue line.
5. Excellent compatibility, it can be easily used with other
companies' equipment. It has simple input and output functions, and
can be connected with other companies' equipment without adding any
components.
Main appliaction
Application scenarios such as electronics and automotive industries
where multiple glue cartridges are placed side by side for
collaborative dispensing, and where certain space requirements are
required.
Applicable fluids
Including oil, grease, silicone, solder paste, epoxy resin, UV
glue, sealant, ink, sealant, etc., as well as fluids for dispensing
assembly using syringes.
Technical parameters
Dispensing air pressure output | 0.05~0.6MPa |
Suction pressure output | -20~0kPa |
Disensing mode | STEADY(Linkage)/TIME(Timing) |
Dispensing time set | 10ms~99.99 s |
Main function | Air pressure and parameters of four channels are adjusted
independently Real-time display of dispensing air pressure
Real-time display of suction air pressure Color LCD display +
membrane switch interaction |
Input signal | Dispensing trigger input (one controls four, four channels
synchronized) Four independent dispensing trigger inputs |
Output signal | No/low air pressure alarm during dispensing operation |
Working air pressure input | Higher than dispensing air pressure output 100kPa or more |
Working power input | AC220V/50Hz,50W |
Size(W*H*D) | 335mm*200mm*280mm |
Weight | 5Kg |
Working noise | Lower than 90dB |
FAQ
Q1: Can each channel be controlled independently?
A1: Yes. Each of the four channels can be configured independently
for dispensing time, pressure, and trigger signal. This allows for
flexible operation in multi-zone or multi-valve applications.
Q2: Does it support synchronous and asynchronous dispensing?
A2: Yes. You can configure all channels to dispense simultaneously
or set different timings for each, depending on your process needs.
Q3: What are the advantages of using a 4-channel controller instead
of multiple single-channel units?
A3: A 4-channel controller reduces equipment footprint, simplifies
wiring, lowers total cost, and enables centralized control for
better synchronization and easier maintenance.
About Mingseal
Founded in 2008, Changzhou Mingseal Robot Technology Co., Ltd. is a
technology-driven manufacturer of high-end equipment, specializing
in connection, assembly, inspection systems, and key components for
advanced semiconductor packaging and precision electronics. Our
solutions are widely adopted by leading customers in sectors such
as semiconductor packaging, consumer electronics, and automotive
electronics. With a strong presence across Asia and the Americas,
we deliver reliable support and innovation globally.
Partner with Mingseal to power the future of automatic
manufacturing!
