Industrial 4-port 10/100/1000Base-T + 1-port 100/1000Base-X SFP Ethernet
Switch with 110~230VAC Input
Industrial 4-Port SFP Gigabit Ethernet Switch Overview
The LNK-IMC-A1400G-SFP Series is a Gigabit Ethernet switch that can be mounted on a DIN rail.
It has 4x 10/100/1000Base-T ports and 1x 100/1000Base-X SFP slot for connecting to fibre networks.
It can operate in extreme temperatures (-40°C to 75°C) and complies with EN55022 standards.
It supports single/multi-mode SFP modules and can extend network reach up to 120km
(single-mode full-duplex). Auto-negotiation, half/full-duplex modes and wide-range AC power
(110V-230V) make it stable, reliable and cost-effective for fibre-optic
networks..
Industrial 4-Port SFP Gigabit Ethernet Switch Features
4 10/100/1000BASE-T RJ45 ports, support auto MDI/MDI-X function
1 SFP port, supports 100Base-FX or 1000Base-X dual mode (DIP switch switch)
Support flow control function and broadcast storm suppression
Support VLAN and QoS functions to optimize network management and data transmission
Supports up to 10K byte jumbo frames to improve transmission
efficiency
110~230VAC terminal block power input, convenient for industrial site access
Support DIN rail and wall mounting
Industrial-grade wide temperature design: -40°C to 75°C
Industrial 4-Port SFP Gigabit Ethernet Switch Technical Indexes
Ethernet |
Standards: | IEEE802.3 10Base-T |
IEEE802.3u 100Base-TX/FX |
IEEE802.3ab 1000Base-T |
IEEE802.3z 1000Base-X |
IEEE 802.1d Spanning Tree |
IEEE 802.1q VLAN TAG |
IEEE 802.1p Qos |
Processing Type: | Store-and-Forward |
Forward Filter Rate: | 14,880pps (10Mbps) |
148,800pps (100Mbps) |
1,488,000pps (1000Mbps) |
Packet Buffer Memory: | 1 Mbit |
Max Packet Length: | 9K Bytes |
Address Table Size | 4K MAC Addresses |
Interface |
Connector: | 4x RJ45 10/100/1000Base-T |
Optical Port: | 1 x SFP 1000Base-X or 100Base-FX (DIP Switch) |
Electrical and Mechanical |
Input Power: | 110~230VAC, 6-pin terminal block |
Power Consumption: | 5W Max. |
LED Indicators: |
PWR: | Power Status |
L/A: | LINK/Activity |
SYS: | System Status |
1000M: | 1000M Fiber Status |
Dimensions (WxDxH): | 95 x 95 x 30 mm |
Weight: | 0.26Kg |
Casing: | Aluminum Case |
Mounting Options: | DIN-Rail / Wall-mount |
Environmental |
Operating Temperature: | -40°C to 75°C (-40°F to 167°F) |
Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF | > 200,000 hrs |
Regulatory Approvals |
ISO9001, CE, FCC, RoHS |
EMI: EN55022:2010+AC: 2011, Class A EN 61000-3-2: 2006+A1: 2009+A2: 2009 EN 61000-3-3: 2013 EN55024: 2010 |
EMS: IEC 61000-4-2: 2008 (ESD) IEC 61000-4-3: 2010 (RS) IEC 61000-4-4: 2012 (EFT) IEC 61000-4-5: 2014 (Surge) IEC 61000-4-6: 2013 (CS) IEC 61000-4-8: 2009 (PFMF) |
Industrial 4-Port SFP Gigabit Ethernet Switch Ordering Information
Model | Description |
LNK-IMC-A1400G-SFP | Hardened 4-Port 10/1001000BASE-TX to 100/1000BASE-X SFP Ethernet Switch |
SFP Options | ► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
► SFP module is to be purchased separately. |
Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
Power Options | ► 110~230VAC Power Supply. Open Wire for Terminal Block |
Industrial 4-Port SFP Gigabit Ethernet Switch Switch Panel
After-Sales and Warranty Policy
It is composed of online customer service and telephone customer service,
providing product consultation, remote technical support, maintenance and acceptance services.
Service Policy: Three-month replacement and three-year warranty.
Replacement: Within three months of purchasing a series of products, after
testing the product failure
by technicians and man-made damage caused by non-natural disasters,
the purchaser can directly
go to the purchasing point to replace the same type of products.Or
a product of comparable performance.
If there is no trouble in product testing, the original sample will
be returned.
Warranty: Man-made damage caused by non-natural disasters, our company's
free warranty period is 1 year.
[The following circumstances do not fall within the scope of
replacement and free maintenance]
1.Damage caused by operation and maintenance not in accordance with
the instructions in the product manual.
2.Damage caused by human factors, such as inappropriate voltage
input, water intake and breakage.
3.Damage to products caused by natural disasters, such as
lightning, earthquakes, fires, etc.
3.Unauthorized alteration of the inherent settings or repair
without the company's permission.
4.Products beyond the scope of free maintenance.
5.Damage caused by transportation, loading and unloading during
repairs sent by customers.
6.The product bar code or model on the product warranty card does
not conform to the product itself.
7.Failure or damage caused by other non-product problems such as
design, technology, manufacturing and quality.
