MK9 5000pcs/min Cigarette Making Machine and Assembling Machine With Tray filler
Introduction
MK9+MAXS+HCF80 Cigarette Making Machine and Assembling Machine is
used for making cigarette and filter rod of the cigarette.
In order to meet the international demand of the small-sized and
medium-sized factory, we have successfully improved MK9+MAXS+HCF80
Cigarette Making Machine And Assembling Machine combination.
The Upgraded MK9+MAXS+HCF80 Cigarette Making Machine. And
Assembling Machine Combination adopts Servo drive, PLC controller,
industrial bus, touch screen, and valve terminal. Its speed has
reached 5,000cig/min. Through our development of many parts, its
stability and capability have been greatly improved. So far, it has
been exported to America, Canada, Germany, Czech, Malaysia and
Bosnia & Herzegovina. Nowadays MK9-MAX combination is our main
product for export and enjoys wide popularity in the world.
Main Parameters :
Output: 5000cig/min for the king size cigarettes | Frequency: 50Hz |
3500cig/min for the super slim cigarettes | Total power: 50KVA |
Cigarette parameter | Outside dimensions |
Filter-cigarette length: 65 ～110± 0.5 mm | Cigarette maker : 3630× 1270 × 1870mm |
Tobacco rod length: 55 ～90 mm
| Plug assembler: 3340×1340× 1820mm |
Cigarette diameter: φ 5.4 ～φ 9.0 mm | Tray Filler : 2350×2400× 2100mm |
Power supply: 380V ± 10%(3phases) | Total weight: 8600kg |
Advantages:
1. The cigarette cutting system uses the double-knife
single-cutting system with lower-rise temperature and lower noise.
This gives the very good quality of the cigarette cut.
2. The complete suction system and high air pressure system .
3. The hopper system adopts AC servo motor to directly drive the
tobacco cutting system. The timing belts are used instead of the
gears, so the even tobacco-feeding is greatly improved and the
maintenance cost is reduced as well.
4. It adopts AC servo driving system that simplifies the mechanical
structures and reduces the failure and maintenance cost, and
improves the transmission precision.
5. Electric control system:
◆ control center: it adopts the SIEMENS PLC S7-300 series.
◆ weight controller: the microwave weight control system is adopted
to avoid any harm to people.
◆ man-machine interface: The SIEMENS touch screen provides friendly
man-machine interface, which displays the machine status and
production data precisely. It is also convenient to modify the
system parameter and check out the failure.
