Civil Engineering Additive PP Macro Fiber Wave Form 24-60mm For
Cement Reinforcement And Anti-Carcking
PP macro fiber wave Description:
PP macro fiber wave is also called plastic steel fiber, imitation
steel fiber, its main raw material is polypropylene. The surface of
pp macro fiber wave is rough, the outline is clear. PP macro fiber
wave has good dispersion and adhesion with cement matrix. PP macro
fiber wave has both the function of steel fiber and the advantages
of synthetic fiber, mainly used to replace the welded metal mesh
and steel fiber in the concrete panel structure, increase the
toughness of concrete, improve the resistance to temperature stress
or anti-burst ability. PP macro fiber wave is a kind of new
reinforced and toughened material. When the fiber content is
higher, the effect of fiber on early crack resistance of concrete
is more obvious.
PP macro fiber wave Features:
- All grades of concrete to provide good anti - fatigue, anti -
shrinkage, anti - seismic and good toughness.
- Simple operation, not easy to group, safety, reasonable price, cost
savings..
- It can be used in highly corrosive, humid environment.
- The surface has been embossed, which greatly improved the cohesive
force between fibers and concrete, and also boosts shrinkage
resistance and crack resistance.
- The strength of synthetic macro fiber is not as strong as that of
steel fiber, but the experiment shows that under the same
conditions, each cubic meter concrete needs 3kg-6kg of synthetic
macro fiber, while steel fiber needs 25kg-40kg. The results show
that the concrete with macro synthetic fiber has better toughness
and anti-microcrack effect.
PP macro fiber wave Proposed Dosage:
The dosage rate is dependent on the actual application however the
minimum dosage range is 3kg/m3-6kg/m3.
PP macro fiber wave Typical Application:
PP macro fiber wave mainly used in concrete panel structure,
reinforced and partially reinforced concrete structure and
injection engineering, dedicated to roads, railways, tunnels,
culverts of concrete reinforced fiber.
PP macro fiber wave can be used for highway pavement, bridge deck,
airport pavement, apron, dock yard pavement, faced rockfill dam
panel, industrial building floor, warehouse floor, etc., used to
improve the cracking resistance, flexural tensile strength, bending
toughness, impact resistance, fatigue resistance of these panel
structures.
PP macro fiber wave Typical Packing:
| 4kg per PE bag | 552kg on a pallet 5520kg/1X20`FCL 12960kgs/1X40`HQ. |   |
| 20kg per carton | 11000kgs/1X20`FCL 21600kgs/1X40`HQ |   |
Certificate:
