HCDX-Y8T AC/DC Magnetic Yoke Flaw Detector Magnetic Particle Flaw
Detection Local Magnetization
HCDX-Y8T is the latest AC portable yoke developed by our company,
equipped with portable AC power supply, which can get rid of the
bondage of power supply and facilitate field operation. It is used
for magnetic particle flaw detection and local magnetization of the
workpiece. The machine is compact and durable, and the lifting
force and other indicators meet the requirements of GB/T
15822.3-2005/ISO 9934-3-2002, ASME V and other standards.
Special AC portable power supply adopts advanced technology output
standard AC220V/50HZ power supply, adopts intelligent IC control,
the output waveform of the machine is pure sine wave, and has very
perfect protection functions (including output overload protection,
output overcurrent protection, output short-circuit protection,
battery high voltage protection, battery low voltage protection,
high temperature protection). Special power supply using large
capacity high-performance imported lithium, long service life.
1. Main features of the machine
Portable AC power supply, easy field operation.
Light weight, compact and convenient.
Large span, two movable joints, flexible adjustment.
Small working current, low heat.
2. Machine structure
| Item | Part Number | Item | Part Number |
| 1 | Yoke | 6 | Aviation connector cover connection cable |
| 2 | Inductive LED lighting | 7 | Aviation connector cover connection cable |
| (Optional accessories) |
| 3 | Yoke foot | 8 | Power Cable |
| 4 | microswitch | 9 | charger |
| 5 | Power line aviation connector | 10 | Portable power supply |
3. Usage method
Connect the dedicated AC portable power supply to the yoke
Turn on the switch on the portable power supply, press the start
button switch, wait a few seconds after the button indicator red
light, you can work. Turn off the power switch after use.
The two magnetic poles of HCDX-Y8T are placed on the surface of the
detected object, and a certain pressure is applied to make the two
magnetic poles in good contact with the detected object. Press the
button switch, turn on, start magnetization, loosen, magnetization
ends. When the yoke switch is turned on, the magnetic powder is
applied to the surface of the detected object (dry, wet,
fluorescent magnetic powder can be applied).
If the tested surface is too wide, it should be segmented
magnetized, and the effective parts between the segments must have
a certain overlap.
Rotate the movable joint between the magnetic feet, and the
distance between the magnetic feet can be adjusted between 45mm and
225mm.
When used, it should pass for 5 seconds and break for 5 seconds,
and can be used continuously for 3 hours.
Ac portable power charging: Turn off the portable power switch
before charging. When the buzzer sounds, it means that the power is
insufficient and should be charged in time. The AC portable power
supply is charged for 6 to 8 hours each time, when the indicator
light on the charger turns from red to green, it means that the
electricity is full, and the full charge can be used for 3 hours.
Indicator If the red light is on, the device is faulty.
4. Technical parameters
4.1 Yoke
| Item | Indicator | Item | Indicator | |
| Yoke Weight | 2.35Kg | Sensitivity | The 30/100A test piece is clearly displayed | |
| Power supply | AC:220V/50Hz | Lifting power | ≥4.5Kg | |
| Electric current | No-load | 1.4A | Temporary load rate | On 5 seconds, off 5 seconds, continuous use of more than 3 hours | |
| Load | 1.0A | Temperature rise | Handle surface temperature ≤40 ° C | |
| Magnetic electrode distance | 45~225mm | Insulation strength | >2MΩ | |
| Power cord length (spring wire) | 3m | Size of magnetic foot contact surface | 20×21mm | |
|
4.2 AC Portable Power Supply
| Item | Indicator | Item | Indicator |
| Power supply weight | 973g | Charging time | 4hours |
| Output power supply | AC:220V/50Hz | Endurance | 4 hours |
5. Configure the table
| Iiem | Name | Quantity |
| 1 | Host | 1 |
| 2 | 5-core power cable | 1 |
| 3 | Yoke strap | 1 |
| 4 | Yoke backpack | 1 |
| 5 | Hex key 3mm | 1 |
| 6 | Ac portable power supply | 1 |
| 7 | charger | 1 |
| 8 | Power pack | 1 |
| 9 | Instruction manual | 1 |
| 10 | Certificate of conformity1 | 1 |
| 11 | Instrument container | 1 |
