SSD1306 0.96'' OLED Display Module Y&B 128x64 Dots 4PIN I2C Interface

0.96 Inch OLED Display Module Y&B 128x64 Dots SSD1306 4PIN I2C Interface

Specifications of a 0.96-Inch OLED Module:

1. Display Size:

   • Diagonal Size: 0.96 inches.

   • Active Area: Approximately 21.74mm x 10.86mm.

2. Resolution: Commonly 128x64 pixels

3. OLED Type:

   • Monochrome: Available in single colors like white, blue, or yellow.

   • Bicolor: Displays two colors, such as yellow and blue, split horizontally.

4. Driver IC:

   • SSD1306: The most commonly used controller for 0.96-inch OLED displays.

   • SH1106: Another compatible controller, typically with similar functionality.

5. Interface:

   • I2C: Default for most 0.96-inch OLED modules; uses two wires (SDA, SCL) for data communication.

   • SPI: Some variants support SPI for faster communication.

6. Power Requirements:

   • Voltage: Typically 3.3V or 5V (depending on the module).

   • Low power consumption due to the self-emissive nature of OLEDs.

7. Viewing Angle:

   • Wide viewing angles, generally up to 170°.

8. Contrast Ratio:

   • Extremely high, typically 10,000:1, ensuring crisp text and graphics.

9. Form Factor:

   • Compact and lightweight, making it suitable for space-constrained applications.

Detailed Parameters:

OLED Screens ( 0.42 inch~3.12 inch ):

We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.

Connecting a 0.96-Inch OLED Module:

1. Wiring (I2C Interface):

• VCC: Connect to 3.3V or 5V power supply (depending on the module).

• GND: Ground connection.

• SCL: Connect to the I2C clock pin (e.g., A5 on Arduino Uno).

• SDA: Connect to the I2C data pin (e.g., A4 on Arduino Uno).

2. Wiring (SPI Interface) (if supported):

• VCC: Power supply.

• GND: Ground.

• SCL: Serial Clock.

• MOSI: Master Out Slave In.

• CS: Chip Select.

• DC: Data/Command Control.