Water And Air Foam Can Foam Lance For Car Washing
Description:
When washing your vehicle, do you feel you don’t have adequate
lubrication or cleaning power because the suds run off the paint?
You’ll never experience that with the cleaning gun Foam Gun. The
gun allows you to presoak the vehicle with clinging foam. The foam
stays where it’s sprayed. As you wash the vehicle, there is a layer
of light foam between your mitt and the paint. With the cleaning
gun Foam Gun your shampoo foam won’t fall flat.
The Foam Gun only works with an air compressor capable of producing
60-90 psi of air pressure. The higher the air pressure, the greater
the foam generated by the gun. The unique barrel on the gun mixes
the shampoo and pressurized air to create a blizzard of foam.
You’ll be amazed! The amount of foam is regulated by a pressure
valve on the gun. Use as little or as much foam as you need.
For example as below:
About product description:
Abou the item number please check the sheet.
BT-7007SAJ:dry cleaning gun,S(Silvery Forged
Alu);A(BearingType);J(Asia Adaptor)
BT-7007BBE:dry cleaning gun,B(Black Casting Alu);B(Tube
Type);E(Europe Adaptor)
BT-7002: it is include forged Alu and Casting Alu body, also have
Bearing and tube types. And 3 type adaptor. The item number have
BT-7002 (body S or B) and Bearing or tube, with 3 types adaptor.
BT-700&: it is include forged Alu and Casting Alu body, also
have Bearing and tube types. And 3 type adaptor. The item number
have BT-7007 (body S or B) and Bearing or tube, with 3 types
adaptor.
