Product Features
1. The base plate is welded to the upper wing edge plate of the
steel crane beam by two-sided side welding, which can ensure that
the lateral force of the crane is transmitted to the crane beam
smoothly and evenly, and avoid the defect of a large number of
holes in the wing plate on the crane beam.
2. The base plate and the upper buckle plate are connected by a
ball joint. Therefore, under the action of lateral force,
deflection is allowed. It can reduce the harm of the lateral impact
of the crane to the track, crane beam and braking system and other
structures.
3. The base plate is welded to the bottom edge of the track about
1m/m, which plays a good role in limiting the left and right
displacement of the track.
4. Special bolts make the force more reasonable and make the upper
cover plate free to disassemble and assemble, providing extremely
convenient conditions for construction, installation and
maintenance.
5. The CGWK rail clamp is small in size, light in weight, strong in
force, economical and beautiful.
Installation requirements
(1): Before installation, the track should be straightened
according to the design requirements.
(2): Positioning the base plate. Arrange the base with a spacing of
500mm along the direction of the crane track, and position the
center of the bolt in the vertical direction at the track center
value (table). Or position the front edge of the base plate 1m/m
away from the bottom edge of the track.
(3): Weld the base plate. 6mm fillet welds on both sides.
(4): Assemble the fasteners in the following order:
Bolt in place - upper cover - flat washer - spring washer - nut -
tighten.
