Forging Mud Pump Manifold AH130101052200 AH36001-05.32A.00 BOMCO

The discharge manifold is connected with 3 cylinder blocks simultaneously too. It has two ports at left and right side. The drilling fluid can be discharged from left side or right side.

The discharge filter shall be installed at the other side of discharge manifold. The discharging mud go to the drilling fluid line (manifold) after filtering.

Before the mud discharge manifold needs to be repaired, the bypass valve on pressure release line should be opened first, and let the pressure in discharge manifold to be released to zero.

Then install suction manifold and discharge manifold. After adjusting and aligning each part well, use a torque wrench to tighten the connection bolts between suction manifold, discharge manifold and cylinder blocks respectively to specified torque.

How to Install the discharge manifold and accessory manifold?

(1) Wash the contacting face between discharge manifold and cylinder blocks well, install the seal ring and put it onto cylinder blocks. The tightening torque of bolt M39×3 is 1954～2255N.m.

(2)As per discharge manifold requirement, install the accessory manifold (5-way or 4-way), discharge pulsation dampener, relief valve, bypass valve, and pressure release line etc. The tightening torques of bolts and nuts are required to meet clause 12.2.1.

The suction manifold is connected to 3 cylinder blocks simultaneously. It has three ports at left , middle and right. The drilling fluid can be sucked in from left, right or middle port according to your desire.

How to Install the suction manifold and suction desurger?

(1) Install the suction manifold: clean the flange end face of suction manifold,install seal rings and connect it to three cylinder block. The tightening torque of bolt M39×3 is 321～370N.m

(2) Install suction the suction desurger:install the suction desurger onto the suction manifold.

Xian LongWell Machinery Equipment Co., LTD is a professional supplier and solution provider of oil drilling mud pump accessories, complete pumps, and drilling rig components.

LONGWELL itself has foreign trade import and export qualifications and has long-term cooperation with companies in CIS countries, the United States, the Middle East, Indonesia and other regions to provide drilling rig machinery equipment and accessories, as well as sales and services of other oil extraction equipment.

LONGWELL's advantageous products include oil drilling mud pump cylinder liners, hydraulic cylinders, pistons, valve assemblies, pull rods, etc. Our company maintains good technical cooperation with domestic and foreign host factories, and can provide customers with domestic brand mud pump accessories such as Baoshi, Honghua, Lanshi, Erji, Rongsheng, as well as overseas brand mud pump accessories such as NOV, Weatherford, GD, UNBT, etc.

LONGWELL cooperates with top domestic manufacturers in production and research and development, strictly adhering to API-7K standards for product production.

Experienced employees are assigned to the production line to supervise supply chain management and control production quality, providing cost-effective products and services to customers both at home and abroad.

LONGWELL warmly welcomes customers from home and abroad to visit and inquire, and we look forward to cooperating with you.