1.2Ghz 1.3Ghz 30km FPV Video Transmitter 2W 1.2G 1.3G Drone VTX 8
Channels Analog 1060MHz-1380MHz
1.2G1.3G 2W VTX specification:
1.2G/1.3G-2W VTX selects high-strength aluminum alloy CNC shell for
auxiliary heat dissipation, with unique appearance design, stronger
impact resistance and better heat dissipation performance.
7-36V wide voltage input, with temperature control protection
function to prevent overheating and burning. Supports installation
holes of 30.5x30.5mm (M3).
Characteristic:
1. Three adjustable power levels, up to 2000mW, suitable for
long-distance flight
2.9 selectable channels
3. Selected high-strength aluminum alloy CNC shell to assist in fan
cooling
4. Wide voltage input, supporting 7-36V voltage
7. It has temperature control protection function to prevent high
temperature burning
8. Supports installation hole positions of 30.5x30.5mm (M3)
Parameter:
Product Name: 1.2G/1.3G 2W VTX Image Transmission
Size: 40x27.5x13mm
Installation hole position: 30.5x30.5mm (M3)
Frequency band: 1080MHz-1360MHz
Number of channels: 9
Frequency: 1080/1120/1160/1200/1240/1280/1320/1360/1220 (MHz)
Output power: 25mW800mW/2000mW/Bit mode
Frequency stability: ± 100KHz (Typ.)
Frequency accuracy: ± 200KHz (Typ.)
Signal to noise ratio S/N (Fo ± 3MHz):>70dBc
Antenna port impedance: 50 Ohms
Input voltage: DC7-36V (2-8S Battery)
Output voltage: 5V@600mA
Antenna interface: MMCX
Cable interface: sh1.25 6pin
Video format: PAL/NTSC
Working temperature: -10 ℃~+60 ℃
Weight: 22 grams (image only)
Matters needing attention:
1. Install the antenna before use.
2. When the image is overheated, it will activate temperature
control protection and automatically reduce power. Please ensure
good ventilation and heat dissipation during use.
3. The 5V output is only used for the camera. It is forbidden to
connect the power input terminal to the 5V output port, otherwise
it will damage the image transmission.
