Water white Transparent non-allergic medical plaster Hot Melt PSA

DESCRIPTION

This is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for medical plasters. The product is featured high tack and peel and with non allergic.

SUGGESTED USES

Specially for medical plasters.

TYPICAL PROPERTIES

OPERATING GUIDES

The material can be applied by slot die or roll coating hot melt applicators. Suggested operation temperature is 150 – 180°C for both, depending on machines, substrates, and plant conditions.

FDA STATUS

The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”. PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box or 180kg fibre drum. Please consult the sales representative for special requirements.

STORAGE & SHELF LIFE

The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35°C and above 50°C.Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS

Do not mix with other adhesives to prevent contamination.The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns.Adequate ventilation is suggested to remove any vapors or fumes generated.Rotate stocks and using the oldest stock first.

Shanghai Jaour attracts a team of experienced elitists in the hot melt adhesive industry. The company specializes in pressure-sensitive hot melt adhesives for nonwoven disposables, medical products, industrial tapes and labels, waterproofing membranes, and automotive applications, providing comprehensive services that include research and development, manufacturing, sales, and after-sales support.

Vision, Mission, Core Values

Production Capacity

Our clients