Get fast, accurate earth ground testing using all four test methods
The Fluke 1625-2 earth ground tester measures earth ground loop
resistances using only clamps, only stakes, or one clamp and
stakes. With the stakeless test method, the Fluke 1625-2 is able to
measure earth ground loop resistances for multi-grounded systems
using only current clamps. This technique eliminates the dangerous,
and time consuming job of disconnecting parallel grounds, and
finding suitable locations for auxiliary ground stakes. This allows
you to perform earth ground tests in places you’ve not considered
before, such as inside buildings, on power pylons, or anywhere you
don’t have access to soil.
Keep your options open
If a bonded earth ground system does not exist for the building or
structure under test, and there is only one path to ground, you can
use the 1625-2 to perform the fall-of-potential test method with
stakes.
The 1625-2 Earth Ground Tester offers other advanced features
including:
- Automatic Frequency Control to identify existing interference and
choose a measurement frequency to minimize its effect, thus
providing a more accurate earth ground value.
- R* measurement that calculates earth ground impedance at 55 Hz to
more accurately reflect the earth ground resistance that a fault-to
earth ground would see.
The 1625-2 is also very easy to use. World class accessories speed
set up and test time. And the tester tells you which stakes or
clamps to connect for each test. The large rotary switch and
buttons are easy to operate even with a gloved hand. And you can
store up to 1500 records and access them easily via the USB port.
Other useful capabilities:
- Provides R* measurement that calculates earth ground impedance at
55 Hz to more accurately reflect the earth ground resistance that a
fault-to earth ground would see
- Includes USB port for data storage and transfer
- Features IP56 rating for outdoor use
- Offers adjustable limits for quicker testing
- Comes with a rugged carrying case
