76.2-127mm Customizable Cz Purlin Machine For Steel Section

76.2-127mm CZ Purlin Roll Forming Machine

In the field of construction and manufacturing, CZ steel is increasingly widely used, and Cangzhou Zhongtuo CZ steel machine with its outstanding performance and technology, has become the trusted choice of many enterprises.

The CZ steel machine produced by Cangzhou Zhongtuo uses cold bending technology. Through multiple precise roller compressions, it gradually processes the steel strip into the desired CZ steel shape. During this process, every roller compression process is strictly designed and calibrated to ensure high control precision of the CZ steel's size and shape. Advanced forming technology ensures that the cross-section shape of the steel is neat and the surface flatness is high, with no obvious waves or folds. This effectively improves the quality and appearance of the product, and can meet the strict requirements of high-standard building and industrial projects for the quality of steel sections.

Basic parameters of raw materials and products

Schedule 1.C, section steel size table

Schedule 2.Z, section steel size table

Z profile size(Inches)	Z profile size (mm)	Thickness (Inches)	Thickness(mm)	Z profile length(m)	Speed (m/min)
4×1.5×0.75	101.6×38.1×19.05	0.0598	1.51	6m	35
4×1.5×0.75	101.6×38.1×19.05	0.0747	1.9	6m	35
4×1.5×0.75	101.6×38.1×19.05	0.1046	2.66	6m	30
4×1.5×0.75	101.6×38.1×19.05	0.1345	3.5	6m	25
4×2.0×0.75	101.6×50.8×19.05	0.0598	1.51	6m	35
4×2.0×0.75	101.6×50.8×19.05	0.0747	1.9	6m	35
4×2.0×0.75	101.6×50.8×19.05	0.1046	2.66	6m	30
4×2.0×0.75	101.6×50.8×19.05	0.1345	3.5	6m	25
5×2.0×0.75	127×50.8×19.05	0.0598	1.51	6m	30
5×2.0×0.75	127×50.8×19.05	0.0747	1.9	6m	30
5×2.0×0.75	127×50.8×19.05	0.1046	2.66	6m	25
5×2.0×0.75	127×50.8×19.05	0.1345	3.5	6m	20

一, 10 ton hydraulic comachine with trolley
1.	Bearing		10t
2.	Install the inner diameter of the coil		508mm
3.	The shaft of the open coder is tightened		Hydraulic tightening, tightening range of 480-530mm
4.	Maximum volume width		MAX 300mm
5.	Pressure arm		Pneumatic pressure arm, to ensure that the rolling material is not loose
6.	Prop up		With support
7.	Shovel head and calibration		Equipped with shovel head and leveling, add feed clutch, after the clutch release
二,Forming host
1.	Material delivery and calibration		Feed material: feed roller and guide roller
			Flat roll: three up and four, a total of 7 rolls flat. Full solid shaft is heat treated and lathe.
2.	Forming		Equipment base: steel plate welding
			Equipment main engine structure: cast iron memorial arch, model 140
			Bearing cap and nut: chrome-plated
			Formed rows: 16 rows
			Roller material: Cr 12, CNC machining after heat treatment to HRC 58-60, fine turning
			Axis material: 40 Cr
			Axis diameter: 70 / 95mm
			Transmission mode: the gear box
			Speed: about 20-40m / min
			Main motor: 30 kw * 2 sets, Siemens AC frequency conversion motor
			Reducer: K-series
			Size adjustment motor power: 2*1.5kw+2.2kw, Siemens servo motor V90
			Roller clearance adjustment of different thickness: 8*0.75kw (according to the actual design)
			Straight: ensure the tness of finished product
			Hydraulic cut: tracking shear, 45 degrees torsion, no waste, one model, a pair of blades
			Cut-off die material: Cr12 mov
			Cooling system: water cooling lubrication system, with water tank and pump, add filter screen at the water tank to prevent water debris from entering the water tank and burn the pump
			Voltage: 460V, 60 hz, 3ph, (according to customer requirements)
三,Hydraulic system
1.	Work pattern			Hydraulic cut off
2.	Power			11 kw,Air cold
3.	Electromagnetic valve			Ward
四,PLC control system
1.	PLC brand			Siemens brand
2.	Touch screen brand			Siemens brand
3.	Frequency transformer			Siemens brand
4.	Counter			OMRON
5.	low-voltage apparatus			By Siemens or Schneider
6.	Operating language			Chinese and English (support for customization of other languages)
7.	Control cabinet			A power cabinet, an operating console
8.	Function			You can set the order quantity, change the length and length and other equipment. Easy to operate, with the aviation plug is convenient for customers to install. Plus gateway remote.
五,Automatic stacking
1.	The length of the material	The longest is 6 meters
2.	Quantity	1 set
3.	Direction	Longitudinal, as shown in the pictures
4.	Function	1. Automatic feeding and palletizing 2. After a small batch is completed, bundle it once with nylon band, and then move to another station. After several small batches are completed, then make a large bundle with steel band. You need to pack it twice!(For Type C, only)
六,Accessory
NO.	Name				Quantity
1	Overtravel-limit switch				2 set
2	Hydraulic tubing				1 set
3	Electric relay				2 set
4	Tool cabinet				1 set

we can manufacture contains: roofing sheet machine, CZ purlin machine, light steel gauge machine, metal embossing machine, door system forming machine, ceiling system machine, pipe welding machine, slitting and cut to length machines, rack system machines, floor decking machine, stone coated steel roofing sheet machine as so on. The company has passed ISO9001 quality control system certification, European CE safety certification, North American CAS electric certification, and has instill the concept “time is money, quality is life, customer is the king” into the mind of every employees. We strictly control quality while improving production efficiency and shortening delivery time. All the machines produced by us need full line test before leaving the factory, we never send problematic equipment to customers. We have full experience of export and know well about the different needs of customers from both developing countries and developed countries, we provided many satisfactory machine proposals to customers in the past years. Nowadays our machines have already been exported to more than 150 countries and we established long-term and stable cooperative relationship with our clients.