1000FT Cat6 UTP 23AWG Extend To 550MHz Solid Outdoor PE Filling
Glue High Speed Network Lan Cable
Quick Detail:
· Bare solid copper conductor
· 250MHz
· Jacket PE, 60P, -20~75℃
· Rate temperature:60℃ 75℃
· InstallationTemperature: -30℃-+50℃
· CompliestoANSI/TIA-568-B.2&IS0/EC11801
· CE, RoHS, TUV, UL compliant, CPR, ETL, RCM, ISO9001
Description:
>Cat 6 OUTDOOR CABLE Provide 250MHz bandwidth within a distance
of 90 meters, Can be extended to 550MHz. The typical application rate is 1Gbps.
>Cat 6 Cable is filled with glue inside, which can enhance the
waterproof performance of the cable and fix the internal structure.Suitable for use in outdoor environments.
>Cat6 UTP Cables have been widely used in fields such as
computer networks, telephone systems, and security monitoring. They
can support different network transmission rates, such as 100Mbps
Ethernet and 1000Mbps Ethernet.
>Cat6 outdoor cable is suitable for outdoor environments and has
good weather resistance, waterproof performance, and ultraviolet
resistance. It can be used for a long time under harsh outdoor
conditions.
>The product selects high-quality oxygen-free copper as the
transmission conductor. At the same time, cat6 cable adopts the
design of a central cross-shaped PE skeleton to separate four
individual pairs. The electrical transmission performance is
reliable and excellent, reaching and exceeding the Category 6
system indicators, providing abundant margin support for the system
link. It is convenient and fast for construction and laying.
| Structural description |
| ❶ Inner Conductor | Composition : Solid Bare Copper (BC) |
| Diameter : See table below |
| ❷ Insulation | Composition : High density Polyethylene (HDPE) |
| Diameter : See table below |
| ❸ Filler | Type of filler : Cross-Member |
| Composition : High density Polyethylene (HDPE) |
| ❹ Filler | Type of filler : Ripcord |
| Composition : Polyester |
❺ Jacket | Composition : LDPE |
| Dimensions : See table below |
| color : according to the customer’s requirements |
Specifications:
| Product Description: CAT6 UTP 23AWG Solid Outdoor PE Cable |
| Rev.: A | ECN Description: |
| Construction Item Description | Electrical Property |
Conductor |
Material | Bare Solid Copper(elongation: 19-24%) | Conductor Resistance at 20°C | ≤ 9.5 Ω / 100m |
| OD | 23 AWG | Resistance unbalance within a pair | ≤ 2% |
Insulation |
Material |
HDPE 8303 | Insulation Resistance at 20°C after 2min of electrification under a
DC voltage between 100 & 500V |
>1500 MΩ / 100m |
| OD | 0.95 ± 0.01 mm | Mutual capacitance | 5600 pF / 100m MAX |
| Average THK | 0.22 mm | Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m |
Color | 1p: white + 2 blue stripes & blue | Characteristic impedance at 100MHz | 100 ±15 Ω |
2p: white + 2 orange stripes & orange | Dielectric Strength Test Voltage (cd/cd,cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown |
| 3p: white + 2 green stripes & green | Mechanical Property |
| 4p: white + 2 brown stripes & brown |
insulation | elongation before aging | ≥ 300% |
Pair Twist |
Lay & Direction | 1p: S=18.5 mm (26%) | tensile strength before aging | ≥12 MPa |
| 2p: S=15.5 mm (21%) | elongation after aging | ≥ 150 % |
| 3p: S=20.5 mm (30%) | tensile strength after aging | ≥10.5 MPa |
| 4p: S=14.0 mm (19%) |
jacket | elongation before aging | ≥350% |
| OD | / | tensile strength before aging | ≥9.7MPa |
Inner Assemble | Lay | S=90±5 mm | elongation after aging | ≥263% |
| Direction | according to the drawing | tensile strength after aging | ≥7.3MPa |
| Filler | cross member 4.5X4.5X0.4mmT | Packing |
| OD | / | Inner Box | NA |
Filler | Material | Ripcord | Master Carton | NA |
| Construction | 300D |
|
| Fill the glue | gel |
Outside Shield | Shield | / |
| Construction | / |
| Material | / |
| Coverage | / |
Jacket | Material | LDPE |
| Hardness | 81 ±3 |
| OD | 6.1 ± 0.2 |
| Average THK | 0.55~0.60 |
Color | according to the customer's requirements |
Marking Color | according to the customer's requirements |
| Marking | according to the customer's requirements |
Construction ltem Description
| Electrical Properties |
| Conductor Resistance at 20°C | UL 444 & CSA C22.2 No. 214 | ≤ 9.5 Ω / 100m |
| Resistance unbalance within a pair | ≤ 2% |
Dielectric Strength Test Voltage (cd/cd): 1.00KV DC or 0.7 KV AC for 1 min Test Voltage
(cd/screen): 1.00KV DC or 0.7 KV AC for 1 min |
No breakdown |
Insulation Resistance at 20°C after 2min of electrification under a
DC voltage between 100 & 500V | >1500 MΩ / 100m |
| Mutual capacitance | 5600pF / 100m MAX |
| Capacitance unbalance pair to ground at 800Hz or 1 kHz | ≤ 160 pF / 100m |
| Characteristic impedance at 100MHz | 100 ± 15 Ω |
| Spark Test | 2000 ± 250VOC |
| Transmission Properties |
| CAT 6 UTP OUTDOOR CABLE |
No. |
Frequency |
Attenuation (Max) | Propagation Delay (MAX) | Propagation Delay Skew (MAX) |
Return Loss (Min) |
NEXT (Min) |
PS NEXT (Min) |
EL-FEXT (Min) |
PS EL-FEXT (Min) |
| MHz | dB/100m | ns/100m | ns/100m | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) | dB(on 100m) |
| 1 | 4 | 3.78 | 552 | 45 | 23.01 | 66.27 | 63.27 | 55.96 | 52.96 |
| 2 | 8 | 5.32 | 546.73 | 45 | 24.52 | 61.75 | 58.75 | 49.94 | 46.94 |
| 3 | 10 | 5.95 | 545.38 | 45 | 25 | 60.3 | 57.3 | 48 | 45 |
| 4 | 16 | 7.55 | 543 | 45 | 25 | 57.24 | 54.24 | 43.92 | 40.92 |
| 5 | 20 | 8.47 | 542.05 | 45 | 25 | 55.78 | 52.78 | 41.98 | 38.98 |
| 6 | 25 | 9.51 | 541.2 | 45 | 24.32 | 54.33 | 51.33 | 40.04 | 37.04 |
| 7 | 31.25 | 10.67 | 540.44 | 45 | 23.64 | 52.88 | 49.88 | 38.1 | 35.1 |
| 8 | 50 | 13.66 | 539.09 | 45 | 22.21 | 49.82 | 46.82 | 34.02 | 31.02 |
| 9 | 62.5 | 15.38 | 538.55 | 45 | 21.54 | 48.36 | 45.36 | 32.08 | 29.08 |
| 10 | 100 | 19.8 | 537.6 | 45 | 20.11 | 45.3 | 42.3 | 28 | 25 |
| 11 | 125 | 22.36 | 537.22 | 45 | 19.43 | 43.85 | 40.85 | 26.06 | 23.06 |
| 12 | 200 | 28.98 | 536.55 | 45 | 18 | 40.78 | 37.78 | 21.98 | 18.98 |
| 13 | 250 | 32.85 | 536.28 | 45 | 17.32 | 39.33 | 36.33 | 20.04 | 17.04 |
| 14 | | | | | | | | | |
| 15 | | | | | | | | | |
| 16 | | | | | | | | | |
| 17 | | | | | | | | | |
| 18 | | | | | | | | | |
| Remarks: ＊ are the reference values. |
Notices:
1. Open the packaging, check the products carefully, and take them
gently.
2. Please strictly follow the wiring standards during construction,
and do not tie or excessively bend the network cables.
3. When making RJ45 network cable connectors, please follow the
T568B or T568A standards to ensure the correct wire sequence and
avoid problems such as disconnected lines or unstable network
connections.
4.It is best to use a single network cable at a distance of no more
than 100 meters to ensure optimal transmission performance.
5. Ensure that the shielded network cable is grounded during
installation.
Applications:
Widely used in office buildings, schools, research institutions,
airports, high-speed trains, hospitals, hotels, industries,
shopping malls, supermarkets, etc.
FAQ
UL/CE/RoHS/ETL/CPR Certificate Lan cable Cat6 UTP 23AWG Extend to
550MHz Solid Copper Outdoor PE High Speed Lan Cable Filling glue
Q1. Can I order samples of Lan cables?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass
production.
Q3. Do you have a minimum order quantity limit for network cable
orders?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by sea, which usually takes about 7 days to
arrive.
Q5. How to proceed an order for network cable?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q6.Is it OK to print my logo on network cable product?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 10 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.2%.
Secondly, for individual defective products, we will remedy them as
soon as possible and send them to you, or we can discuss solutions
based on the actual situation to achieve 100% satisfaction for you.
