Premium CE Approved Silent 2 Pieces 150kw 160kw 180KVA 190KVA
200KVA Natural Gas Generator CHP In Parallel Overall Power Size
300KW 320KW 400KVA
Why SevenPower CHPs?
- More than 15years experience in gas generator set/CHP
- Keep close cooperation with European companies for better quality
- Environmentally friendly design
- Long time research and development and testing for high
reliability
- Maximum lower the noise level
- Long service intervals
2*150kw in Parallel to reach overall power size of 300kw
-when power needs below the set number, only one unit start
-when power size exceeds the set number, 2nd unit start and share
the overall loads
-when power needs below the set number, one unit shut down
-when power needs below the set number, 2 units shut down
Multiple Units Been Installed Around The World
Specification
| Model | SP160N |
|
| fuel | — | Natural Gas |
| marks | — | Synchro CHP |
| electrical output(KWe) | kVA/kWe | Continuous Power |
| 200/160 |
| thermal output(KWt) | kWt | 227 |
| electrical efficiency | % | 34.9% |
| thermal efficiency | % | 49.4% |
| overall efficiency | % | 84.3% |
| frequency | Hz | 50 |
| voltage | V | 400/230 |
| gas inlet pressure | kPa | 3-5 |
| NG consumption | m3/kW.h | 0.291 |
| Certificate | — | CE |
| water-water heat exchanger | — | SWEP |
| water-exhaust heat exchanger | — | made of full stainless steel |
| Controller | | ComAp |
| Engine type | — | 6 cylinders,4stroke,water-coolled |
| RPM | — | 1500 |
| Compression Ratio | — | 11.0 |
| Displacement | — | 11.6L |
| Oil capacity | — | 36L |
| Starting system | — | Electic-start |
| Alternator type | — | Air cooled |
| phase | — | 3 phase |
| insulation system | — | class H |
| protection | — | IP23 |
| Cooling Type | — | air cooled |
For more information about each CHP, please consult with your sales
representative.Thanks.
We provide production following up service
- Keep customers posted on the progress of production.
- Systematical and strict testing before delivering to customers
- Testing
- Including 0%,25%,50%, 75%, 100%, 110% load
- Emergency stop
- All protections(high temperature, low oil pressure, over speed,
over load, over frequency and phase failure etc.)
- Electrical and thermal power output
- Synchronization
Support and Services:
The Natural Gas CHP (Combined Heat and Power) product technical
support and services include:
- Installation and commissioning support
- Remote monitoring and troubleshooting
- On-site maintenance and repair services
- Spare parts management and logistics
- Technical training and documentation
- Performance optimization and energy efficiency analysis
FAQ:
Q: What brand is the natural gas CHP product?
A: The brand name is SevenPower.
Q: Is the product CE certified?
A: Yes, it is CE certified.
Q: Where is the product manufactured?
A: The product is manufactured in Chengdu, China.
Q: What is the minimum order quantity?
A: The minimum order quantity is 1 set.
Q: What is the delivery time for the product?
A: The delivery time is 30-40 days.
Q: What is the model number of the product?
A: The model number is SP160N.
Q: Is the price negotiable?
A: Yes, the price is negotiable.
Q: What are the payment terms for the product?
A: The payment terms are T/T.
Micro CHP on Site Picture
More Information About Our Factory
Our Factory
Our Hannover Exhibition
Our Showroom In Germany
Our Customers' Visiting
