I.Technical data
Machine Dimensions (L*W*H)----700mm*600mm*1100mm
Packing dimensions (L*W*H)----900mm*800mm*1400mm
Mechine net weight ----------150kg
Cutter speed ----------0.3-1 second/time (adjustable)
Grease lubrication (fill grease oil once in 12~15 days)
Ⅱ.Operation instructions of the control button:
1. Turn the power switch ON switch indicator light on, the
man-machine interface display will be on, and the temperature
controller will be displayed on.
2. After the power is turned on, the machine will cut itself, so
that the cutting cutter will stop at the top, and in standby state,
press the start button to produce automatically.
3. Reset the current output value of the human-machine interface to
zero, set the required quantity of output, and wait for the heater
to heat up to the required temperature, the required temperature
can be controlled by the temperature controller, and the
temperature range is 0~200°C.
4. When the temperature reaches the set temperature, the heating
lamp on the temperature controller will change from green to red,
indicating that the heater has reached the required temperature,
and the machine will start to run after pressing the start, until
the required number of finished products is reached. And in
mechanical operation the heating temperature is determined by the
temperature
The controller automatically heats up the heater to keep the heater
within the set temperature range of +/-5°C.
5. In the mechanical operation, to stop the stepper motor, you must
press the stop button.
Ⅲ.Controller function
1. Power switch: controller mechanical, electrical, electric power
ON/OFF
2. Start: Make the mechanical stepper motor run.
3. Stop: Stop the mechanical stepper motor.
4. Send: Roll out the paper molding.
5. Cut: Cut the part of the paper that is pushed out.
6. Thermostat: set the working temperature of the heater
(range 0~200°C)
