Home > Transfer Film >

DY-M586 SILICONE GASKET MAKER (NEUTRAL)

Ask Lasest Price

Add to Cart

Product Details
Company Profile

DY-M586 SILICONE GASKET MAKER (NEUTRAL)

1. Properties & Applications

High temperature silicone sealant is developed by advanced technique. It is of one component, good sealing, resistance to high temperature and oil, weatherability, no flowing with vertical operation, no corrosion, low odor. It can replace a variety of rubber pads, asbestos mat, cork pad and paper pad to prevent leakage of water, oil, gas.
High temperature silicone sealant is applicable to automobiles, motorcycles, marine engines, gear boxes, fuel tank, construction machinery, chemical equipment, pipeline pumps, instrumentation, electronics industry, electrical devices, and also to flat flanges, pipe joints, sealing cover joints in other mechanical equipment.

2. Directions

Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
Pierce the nozzle with the cap. Coat the gasket from the outer edge to inner edge at about 1.6 -3.2 mm thickness.
The surface of adhesive film will create reaction in about 10-20 minutes. Then press and tighten the two sealing sides.
It’ll take 24 hours to reach its maximum strength at room temperature 25.
Re-cap the tube after use. Wash your hands with water, and clean tools.

3. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

In the event of mass use, make a pre-test.
The adhesive is irritable to skin and eyes.
Wear gloves while applying glue.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

4. Parameters

Color	Elongation (%)	Filling Gap	Heat resistance
Black paste	300	6mm	-60ï½+320
Touch dry	Full cure	Shelf lifeï¹25ï¹	Compressive Strength
15minsï½20mins	24hrs	12 months	10MPa

Product Tags:

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: Hunan Baxiongdi New Material Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

DY-M586 SILICONE GASKET MAKER (NEUTRAL)

DY-M586 SILICONE GASKET MAKER (NEUTRAL)

DY-M586 SILICONE GASKET MAKER (NEUTRAL)

NEUTRAL SILICONE GASKET MAKER

SILICONE GASKET MAKER

DY-M586 SILICONE GASKET MAKER (NEUTRAL)

You May Like

DY-M583 RTV SILICONE GASKET MAKER (NEUTRAL)

DY-M583 SILICONE SEALANT ADHESIVE (ACID)

DY-M586 RTV SILICONE SEALANT ADHESIVE (ACID)

DY-M587 SILICONE GASKET MAKER (NEUTRAL)

DY-M587 SILICONE SEALANT ADHESIVE (ACID)


*From:	Your email address is incorrect!
*To:	Hunan Baxiongdi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!