1. Properties
DY-E609 is two-component ultra-strength epoxy adhesive, which is
developed by advanced and environmentally-friendly technique. It is
characterized with low odor, high tensile and peel strength. It is
resistant to water, oil, acid, and alkali.
2. Applications
DY-E609 is applicable to households and industries such as
electronic appliances, mechanical equipment, hardware mechanical
and electrical. It forms excellent self and inter-bonding to
substances such as metals, woods, glass, ceramics, and rigid
plastics.
3. Directions
1. Clear the contaminants like water, dusts, oil of the substrate
surface to keep it clean, dry and smooth.
2. Remove the cap from the tube and puncture the tubes.
3. Mix part A and part B at the ratio of 1:1. Mix thoroughly until
a uniform color is achieved. It must be used within 30 minutes.
4. Apply a thin coat to both surfaces. Mixture will become warm
while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5â, it will take a longer
time to cure.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing
placesã
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical
treatment immediately if necessary.
5. Parameters
Color | Viscosity(CPS/25â) | Mixing Ratio | Wrok Timeï¼25â/100gï¼ |
A:Milky White | A:40000-45000 | 1:1 | 40 Minutes |
B:Pale Yellow | B:40000-45000 |
Cure Timeï¼25â/100gï¼ | Lap Shear Strength(St-St) | Heat Resistance(â) | Shelf Life(25â) |
Touch Dry:90 mins | ≥14 Mpa | -60 to +150 | 24 months |
Full Cure:24 hrs |
ãã
ãã
