1. Properties
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil.
Non-flammable, non-shrinking and waterproof. Makes metallic grey
finish. Can be filed, grinded and drilled.
2. Applications
30-MIN EPOXY ADHESIVE is the adhesive for households and
industries. Suitable for repairs and welds. Makes superior bond
strength. Bonds to all metal, plastic, rubber, wood, ceramics,
glass and concrete.
3. Directions
- Clear the contaminants like water, dusts, oil of the substrate
surface to keep it clean, dry and smooth.
- Remove the cap from the tube and puncture the tubes.
- Mix part A and part B at the ratio of 1:1. Mix thoroughly until a
uniform color is achieved. It must be used within 20 minutes.
- Apply a thin coat to both surfaces. Mixture will become warm while
it sets. No clamping. Slight pressure is needed while material
sets. If temperature is below 5â, it will take a longer time to
cure.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing
placesã
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical
treatment immediately if necessary.
5. Parameters
Color | Viscosity(CPS/25â) | Mixture | Work Time(25â/100g) |
A:black | A:ï¼100000 | 1:1 | 20 Minutes |
B:milky white | B:ï¼100000 |
Cure Time(25â/100g) | Lap Shear Strength(St-St) | Heat Resistance(â) | Shelf Life(25â) |
Touch Dry:30 Mins | ≥16 Mpa | -60 to +100 | 12 months |
Full Cure:24 hrs |
