Product Description
1. Properties
DY-E501 Clear Epoxy Adhesive is developed by advanced and
environmentally-friendly technique and imported raw materials. It
is characterized with being clear, fast curing, strong bonding, and
bonding a wide range of materials. It is resistant to water, oil,
acid, and alkali.
2. Applications
DY-E501 is applicable to bonding and repairing LED lights,
machinery, electronics, instrumentation, automotive, shipbuilding,
textile, construction, chemical industry, aviation, medical
equipment. It forms excellent bonding to various rigid substances
such as metal, ceramic, marble, glass, wood and plastics.
3. Directions
- Clear the contaminants like water, dusts, oil of the substrate
surface to keep it clean, dry and smooth.
- Mix part A and part B at the ratio of 1:1
- Apply the mixture onto the substrate to be bonded. Press and rotate
the substrates while bonding.
- Initial cure is in 5 minutes. It’ll take 12 hours to reach its
maximum strength. It can be operated at -60℃~100℃.
- More treatment is needed when necessary after its curing to reach
its greatest effect.
- The adhesive is viscous, which is normal.
4. Storage & Warinings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing
places.
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical
treatment immediately if necessary.
5. Parameters
Color | Viscosity
(CPS/25℃) | Mixing Ratio | Work Time(25℃/100g) | Cure Time
(25℃/100g) | Lap Shear Strength
(St-St) | Heat Resistance
(℃) | Shelf Life
(25℃) |
A:Clear | A:10000-15000 | 1:1 | 5 Mins | Touch Dry:
5-10 mins | ≥8 Mpa | -60 to +100 | 12 months |
B:Clear | B:10000-15000 | Full Cure:
12 hrs |
