| Product characteristics |
Number of inputs and outputs Number of digital outputs: 2; Number
of analogue outputs: 1
Process connection threaded connection M18 x 1,5 internal thread |
| Application |
| Special feature | Gold-plated contacts |
| Media | water; glycol solutions; air; oils |
| Note on media | | low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C) |
| high-viscosity oils with viscosity: > 40 mm²/s (40 °C) |
| Medium temperature | [°C] | | -20...90 |
| Pressure rating | [bar] | | 100 |
| Pressure rating | [Mpa] | | 10 |
MAWP (for applications
according to CRN) | [bar] | | | 100 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — SA5000-01 — 26.04.2021 — |
|
| SA5000 |
| Flow sensor |
| SAD10XDBFRKG/US-100 |
| Electrical data |
| Operating voltage | [V] | | 18...30 DC |
| Current consumption | [mA] | | < 100 |
| Protection class | | | III |
| Reverse polarity protection | | | yes |
| Power-on delay time | [s] | | 10 |
| Inputs / outputs |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Outputs |
| Total number of outputs | 2 | |
| Output signal | switching signal; analogue signal; frequency signal; IO-Link;
(configurable) |
| Electrical design | | PNP/NPN |
| Number of digital outputs | | 2 | |
| Output function | normally open / normally closed; (parameterisable) |
Max. voltage drop switching
output DC | [V] | | | 2.5 | |
Permanent current rating of
switching output DC | [mA] | | 250 |
| Number of analogue outputs | | 1 |
| Analogue current output | [mA] | | 4...20; (scalable) |
| Max. load | [Ω] | | 350 |
| Short-circuit protection | | yes |
Type of short-circuit
protection | | pulsed |
| Overload protection | | yes |
| Frequency of the output [Hz] | | 0...1000 |
| Measuring/setting range |
| Probe length L | [mm] | | 45 | |
| Operating mode | | relative; absolutely liquid; absolutely gaseous;
(absolute: reference measurement recommended) |
| Note on factory setting | | Operating mode: relative |
| Liquids |
Setting range
Greatest sensitivity | [m/s]
[m/s] | | 0.04...6
0.04...3 |
| Gases |
Setting range
Greatest sensitivity | [m/s]
[m/s] | | 0...200
2...100 |
| Temperature monitoring |
Measuring range
Resolution | [°C]
[°C] | | -20...90
0.2 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — SA5000-01 — 26.04.2021 — |
|
| SA5000 |
| Flow sensor |
| SAD10XDBFRKG/US-100 |
Accuracy / deviations
Flow monitoring |
| Temperature drift | [cm/s x 1/K] | 0,003 m/s x 1/K (< 20 °C; > 70 °C) |
| Temperature gradient [K/min] | | 100 |
| Accuracy | | ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum
sensitivity under the following conditions:; water: 20...70 °C;
inlet
length: 1.5 m; DN25 (DIN 2448); mounting position according to
instructions; Accuracy can differ for other media and mounting
positions.) |
| Repeatability | | 0,05 m/s; (water; flow velocity: 0,05...3 m/s) |
| Temperature monitoring |
Temperature drift ± 0,005 K/°C
Accuracy [K] ± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air;
flow velocity: > 10 m/s) |
Response times
Flow monitoring |
| Response time [s] | 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09) |
| Temperature monitoring |
| Dynamic response T05 / T09 [s] | 1,5 (T09); (water; flow velocity: 0,3...3 m/s) |
| Software / programming |
| Parameter setting options | hysteresis / window; normally open / normally closed; switching
logic; current/
frequency output; medium selection; Damping; Teach function;
display can be
rotated and switched off; standard unit of measurement; process
value colour |
| Interfaces |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 | |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device
Diagnosis |
| SIO mode | yes |
| Required master port type | | A |
| Process data analogue | | 2 |
| Process data binary | | | 2 | |
| Min. process cycle time [ms] | | | 3 | |
| Supported DeviceIDs | | Type of operation | DeviceID |
| Factory setting / ModE = (REL) | 533 |
| ModE = (LIQU) | 540 |
| ModE = (GAS) | 547 |
| Operating conditions |
| Ambient temperature [°C] | -40...80 |
Storage temperature
Protection | [°C] | | -40...100
IP 65; IP 67 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — SA5000-01 — 26.04.2021 — |
|
| SA5000 |
| Flow sensor |
| SAD10XDBFRKG/US-100 |
| Tests / approvals |
| EMC | | DIN EN 60947-5-9 | |
| Shock resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF [years] | | 132 |
| UL approval | | UL Approval no. | I003 |
| Mechanical data |
| Weight [g] | 314 | |
| Materials | stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301);
PBT-GF20; PBT-GF30 |
Materials (wetted parts)
Process connection | stainless steel (1.4404 / 316L); Gasket: FKM
threaded connection M18 x 1,5 internal thread |
| Displays / operating elements |
| Display unit | 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³) |
| Display | switching status | 2 x LED, yellow |
| measured values | alphanumeric display, red/green 4-digit |
| Remarks |
| Remarks | | MW = measured value |
| MEW = Final value of the measuring range |
| Pack quantity | | 1 pcs. | |
