| Product characteristics |
| Laser protection class | | 2 |
| Housing | | rectangular |
| Electrical data |
| Operating voltage | [V] | | 18...30 DC; ("supply class 2" tocULus) |
| Current consumption | [mA] | | < 150 |
| Protection class | | | III |
| Reverse polarity protection | | | yes |
| Typ. lifetime | [h] | | 50000 |
| Inputs / outputs |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Outputs |
| Total number of outputs | 2 |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. current load per output [mA] | | 200 |
| Number of analogue outputs | | 1 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — O1D100-06 — 13.04.2023 — |
|
| O1D100 |
| Photoelectric distance sensor |
| O1DLF3KG/IO-LINK |
| Analogue current output | [mA] | | 4...20; (IEC 61131-2) |
| Max. load | [Ω] | | 250 |
| Analogue voltage output | [V] | | 0...10; (IEC 61131-2) |
| Min. load resistance | [Ω] | | 5000 |
| Short-circuit protection | | yes |
Type of short-circuit
protection | | pulsed |
| Overload protection | | yes |
| Detection zone |
| Max. light spot width | [mm] | | 15 |
| Max. light spot height [mm] | | 15 |
| Light spot dimensions refer to | | 10 m |
| Background suppression [m] | 0...19 |
| Measuring/setting range |
| Measuring range | [m] | | 0.2...10; (white paper 200 x 200 mm 90% remission) |
| Sampling rate [Hz] | 1...50 |
| Interfaces |
| Communication interface | | IO-Link |
| Transmission type | | COM2 (38,4 kBaud) |
| IO-Link revision | | 1.1 |
| SDCI standard | | IEC 61131-9 |
| Profiles | | Smart Sensor: Sensor Identification; Binary
Data Channel; Process Value; Sensor Diagnosis |
| SIO mode | | yes |
| Required master port type | | A |
| Process data analogue | | 2 |
| Process data binary | | 3 |
| Min. process cycle time [ms] | | 6 |
| Supported DeviceIDs | | Type of operation | DeviceID |
| Default | 806 |
| Operating conditions |
| Ambient temperature [°C] | | -10...60 |
| Protection | | IP 67 |
| Tests / approvals |
| EMC | | EN 60947-5-2 | |
| Laser protection class | | 2 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — O1D100-06 — 13.04.2023 — |
|
| O1D100 |
| Photoelectric distance sensor |
| O1DLF3KG/IO-LINK |
| Notes on laser protection | | Caution: | laser light |
| Power: | <= 4 mW |
| Wave length: | 650 nm |
| pulse: | 1,3 ns |
| Do not stare into beam. | |
| Avoid exposure to the laser light. | |
| laser class: | 2 |
| | EN / IEC60825-1:2007 |
| | EN / IEC60825-1:2014 |
| | Complies with 21 CFR 1040 except for
deviations pursuant to Laser Notice No. 50,
dated June 2007. |
| MTTF [years] | | 182 | |
| Mechanical data |
| Weight [g] | 243.5 | |
| Housing | rectangular |
| Dimensions [mm] | 59 x 42 x 52 |
Materials housing: diecast zinc; front pane: glass; LED window: PC
Lens alignment side lens |
| Displays / operating elements |
| Display | switching status | 2 x LED, yellow |
| operation | LED, green |
| distance value, programming | alphanumeric display, 4-digit |
| Accessories |
  Accessories (optional) Protective cover, E21133 |
| Remarks |
| Remarks | | For more information about the measuring range /
application please refer to the operating instructions. |
| Pack quantity | | 1 pcs. |
| Electrical connection |
| Connector: 1 x M12; coding: A |
 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — O1D100-06 — 13.04.2023 — |
|
| O1D100 |
| Photoelectric distance sensor |
| O1DLF3KG/IO-LINK |
| Connection |
 |
| 2: OUT2 switching output or 4...20 mA / 0...10 V |
| 4: OUT1 switching output or IO-Link |
| 5: IN Laser On/ Off |
| Other data |
| Parameter | Setting range | Factory setting |
| Uni | mm, m, inch | mm |
| OU1 | Hno, Hnc, Fno, Fnc | Hno |
| SP1 [mm] | 200...9999 | 1000 |
| nSP1 [mm] | 200...9999 | 800 |
| FSP1 [mm] | 200...9999 | 1200 |
| OU2 | Hno, Hnc, Fno, Fnc, I, U | I |
| SP2 [mm] | 200...9999 | 2000 |
| nSP2 [mm] | 200...9999 | 1800 |
| FSP2 [mm] | 200...9999 | 2200 |
| ASP [mm] | 0...9999 | 0 |
| AEP [mm] | 0...9999 | 9999 |
| rATE [Hz] | 1...50 | 50 |
| dS1 [s] | 0...0.1...5 | 0 |
| dr1 [s] | 0...0.1...5 | 0 |
| dS2 [s] | 0...0.1...5 | 0 |
| dr2 [s] | 0...0.1...5 | 0 |
| dFo [s] | 0...0.1...5 | 0 |
| dIS | d1...3 ; rd1...3; OFF | d3 |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — O1D100-06 — 13.04.2023 — |
|
| O1D100 |
| Photoelectric distance sensor |
| O1DLF3KG/IO-LINK |
| repeatability/accuracy |
| read/write distance (mm) | repeatability of the
measured values
white (90 % remission)
± 5.0 mm
± 5.5 mm
± 17.5 mm
± 27.5 mm
± 60.0 mm | |
accuracy
white (90 % remission)
± 15.0 mm
± 15.0 mm
± 25.0 mm
± 35.0 mm
± 70.0mm | |
| grey (18 % remission) | grey (18 % remission) |
| 200...1000 mm | ±7.5 mm | ± 18.0 mm |
| 1000...2000 mm | ±10.0 mm | ± 20.0 mm |
| 2000...4000 mm | ±22.5 mm | ± 32.0 mm |
| 4000...6000 mm | ±40.0 mm | ± 50.0 mm |
| 6000...10000 mm | | |
Sampling rate
Extraneous light on the object | 50 Hz
< 40 klx | |
| repeatability/accuracy |
| read/write distance (mm) | repeatability of the
measured values
white (90 % remission)
± 16.5 mm
± 16.5 mm
± 30.0 mm
± 37.0 mm
± 75.0 mm | |
accuracy
white (90 % remission)
± 26.5 mm
± 26.5 mm
± 40.0 mm
± 47.0 mm
± 85.0mm | |
| grey (18 % remission) | grey (18 % remission) |
| 200...1000 mm | ±16.5 mm | ± 26.5 mm |
| 1000...2000 mm | ±16.5 mm | ± 26.5 mm |
| 2000...4000 mm | ±37.0 mm | ± 47.0 mm |
| 4000...6000 mm | ±57.0 mm | ± 67.0 mm |
| 6000...10000 mm | — | — |
Sampling rate
Extraneous light on the object | 50 Hz
40...100 klx | |
| repeatability/accuracy |
| read/write distance (mm) | repeatability of the
measured values
white (90 % remission)
± 4.0 mm
± 4.5 mm
± 13.5 mm
± 19.0 mm
± 37.0 mm | |
accuracy
white (90 % remission)
± 14.0 mm
± 14.5 mm
± 23.5 mm
± 29.0 mm
± 47.0mm | |
| grey (18 % remission) | grey (18 % remission) |
| 200...1000 mm | ±4.5 mm | ± 15.0 mm |
| 1000...2000 mm | ±6.0 mm | ± 16.0 mm |
| 2000...4000 mm | ±14.5 mm | ± 24.0 mm |
| 4000...6000 mm | ±21.0 mm | ± 31.0 mm |
| 6000...10000 mm | – | – |
Sampling rate
Extraneous light on the object | 1 Hz
< 40 klx | |
 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve
the right to make technical alterations without prior notice. —
EN-GB — O1D100-06 — 13.04.2023 — |
|
| O1D100 |
| Photoelectric distance sensor |
| O1DLF3KG/IO-LINK |
| repeatability/accuracy |
| read/write distance (mm) | repeatability of the
measured values
white (90 % remission)
± 10.0 mm
± 10.0 mm
± 17.0 mm
± 22.0 mm
± 37.0 mm | |
accuracy
white (90 % remission)
± 20.0 mm
± 20.0 mm
± 27.0 mm
± 32.0 mm
± 47.0mm | |
| grey (18 % remission) | grey (18 % remission) |
| 200...1000 mm | ± 10.0 mm | ± 20.0 mm |
| 1000...2000 mm | ± 10.0 mm | ± 20.0 mm |
| 2000...4000 mm | ± 18.0 mm | ± 28.0 mm |
| 4000...6000 mm | ± 25.0 mm | ± 35.0 mm |
| 6000...10000 mm | – | – |
Sampling rate
Extraneous light on the object
-
Range on black object (6 % remission)
-
The values apply at
constant ambient conditions
minimum power-on time in minutes | 1 Hz
< 40...100 klx
-
<= 4000 mm
-
23 °C / 960 hPa
10 |
