5th Generation DC Brushless Customized Barrier Gate with Arm Direction Can Be Quickly Interchanged

PRODUCT DESCRIPTION

Thank you for purchasing the 5th generation brushless motor barrier gate. This product adopts the latest mold design technology, mold die-casting manufacturing technology, brushless control speed regulation technology, left and right interchangeable quickly, no clutch design, more reliable quality, more convenient to use, the movement adopts two-stage worm gear drive, Three-curved connection rod structure, and the arm works fast and stable. Easy maintenance and long service life.

PRODUCT ADVANTAGES

1. Advanced mechatronics side-mounted design concept: structure compact,quickly assembly,easy maintenance.

2. Molding production: high precision, fast efficiency and guaranteed quality.

3. Worm-gear secondary variable speed transmission: high precision, long lifetime, motor wheel design, gate opening by manually when power off, no blocking, no oil leakage, large torque, low noise, can normally operation at the temperature of -35 °C etc.

4. DC brushless motor design:low consumption, high efficiency, no overheat, wide speed adjustment.

5. Hall limit:automatically detects the limit when power on without debugging, detecting the motor speed at all times and running at speed and stable.

6.Curved triple connecting rod structure design concept, makes arm in vertical and horizontal position, easy to adjust the arm balance, avoid to lift arm violently.

7.Arm direction quickly interchanged: interchanged according to different directions on construction site, reduce inventory and capital pressure.

8.Advanced DC brushless controller: use integrated chip drive, fast processing speed, large memory, good control effect, powerful function, high degree of automation; 24V low voltage power supply, adapt to global voltage, safe and reliable.

TECHNICAL SPECIFICATIONS

MAIN FUNCTION AND FEATURES

1. Operation speed can be adjusted.

2. Slow up and slow down can be adjusted.

3. The limit angle can be adjusted.

4. Left and right direction can be quickly interchanged.

5. The barrier arm can be manually operated in case of power failure.

6. 418 frequency learning code anti-copy remote controller.

7.Infrared photocell sensor I/O signal input function.

8. Loop detector and radar I/O signal anti-collision signal input function.

9. Up, down and stop I/O signal input function.

10. Counting (fleet) function.

11.LED light I/O signal output function.

12.Traffic light I/O signal output function.

13.Up and down in place, normally open and normally closed signal output function.

14.RS485 communication output function.

15.Delay arm drop function.

16.Arm auto-reverse function.

17.Automatic lifting function when power is off (requires additional power storage module).

18.I/O port single-key cycle up and down function.

19. Loop detector normally open and normally closed function.

20.One car passes through each signal to prevent toll evasion function.

21.Anti-collision alarm function (requires additional alarm and sensor).

22. Fire linkage signal input function.

23.The I/O port closes the signal input function.

24.24V storage battery input function.

PRECAUTIONS

1. Follow the correct wiring method to avoid the motor not rotating or burning.

2. The motor should not be overloaded and locked for a long time to avoid excessive temperature rise.

3. Don't disassemble and assemble the assembled gear reducer casually, so as to avoid the entry of sundries or the bad gear meshing and make noise.

4. When connecting the output shaft of the motor and the gear reducer to the load, it cannot be struck or squeezed by gravity, so as to avoid internal deformation and misalignment, resulting in serious noise or jamming.

5. The lead wire of the motor cannot be pulled with force to avoid electric shock accidents.

6. Avoid touching the rotating parts when the motor is running to avoid human injury; the motor casing should be well grounded.