Jaw crusher, feed size: 0-950mm, production capacity: 16-1000T/H.
It is mainly used for crushing various kinds of high hardness ores,
such as granite, basalt, etc. It is widely used in mining,
refining, building materials, highway, railway, water conservancy
and chemical industries. It is widely used in mining, refining,
building materials, highway, railroad, water conservancy and
chemical industry. The maximum compressive strength of the crushed
material is 320MPA. The working part of the jaw crusher is two
jaws, one is the fixed jaw (fixed frequency), which is fixed
vertically (or slightly outwardly inclined at the upper end) on the
front wall of the machine body, and the other is the movable jaw
(movable jaw), which is tilted in the position and forms a crushing
cavity (working cavity) with the fixed jaw on the upper large and
lower small. The movable jaw plate makes periodic reciprocating
motion against the fixed jaw plate, sometimes separate, sometimes
close. When separated, the material enters into the crushing
cavity, and the finished product is discharged from the lower part:
when close to the two plates, the material between the two plates
is crushed by extrusion, bending and splitting.
01.Low noise, less dust.
02. Large crushing ratio, uniform product size.
03. Safe and reliable lubrication system, easy replacement of
parts, simple maintenance.
04. Deep crushing cavity and no dead zone, improve the feeding
capacity and output.
05. Energy saving: 15%-30% for single machine, more than double for
system.
06. The discharge opening has a wide range of adjustment, and the
waste particle size is small, which can meet the requirements of
different users.
