Smooth Dispensing Empty Plastic Airless Pump Bottle Toothpaste
Custom Label Available
♦Product Description:
Experience innovation and cleanliness with the JND Smooth
Dispensing Airless Pump Bottle, specially designed for toothpaste
and other semi-solid products. This empty plastic airless bottle
ensures smooth, mess-free dispensing while maintaining product
freshness by preventing air exposure. Its sleek design is ideal for
modern packaging needs, and with custom label options available,
it’s easy to make it your own. Choose JND for smart, hygienic, and
brand-ready packaging solutions
♦Production Specification:
A. Primary Specification Properties
1. Material
| MATERIAL | MATERIAL DESIGNATION NAME | ALTERNATE MATERIALS |
| Base Material | Dispenser: 1. Spring: TPE 2. Piston: PE 3. Others: PP | N/A |
| Masterbatch | Standard white or customization | N/A |
2. Dimensional Requirements
| Item | Description | Specification |
| 1 | Overall Height | 100ml | 183.0±0.80mm |
| | | |
| 2 | Weight of dispenser (without Piston) | 100ml | 40.5g±2.0g |
| | | |
| 3 | Weight of piston | 2.8g±0.2g |
| 4 | Over cap diameter | 39.60±0.40mm |
| 5 | Inner diameter of body | 37.60±0.15mm |
| 6 | Upper diameter of piston | 37.95±0.15mm |
| 7 | Weight of labels | TBD |
| 8 | Weight of sleeves | TBD |
Weight is excluding the sealing foil on the body |
B. Additional requirements
1.2 Must be free of dirt, grease, oils, or other foreign materials.
1.3 Parts must be free of flash, short shots, sink or other
imperfections that may affect functionality of the part or has
potential to cause injury.
2. Function test
2.1 Vacuum leakage test
After filling with toothpaste, put the finish part with holding
pressure u-0.03MPa, 10 minutes". The result is ok if there is no leakage
2.2 Drop test
After filling with toothpaste, free drop from height 0.5M. The
result is ok if there is no crack on the body.
3. Decoration
- Shrinking sleeves inspection
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* M3.5
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* <3.5
C. Markings
- Mark each pallet clearly on the top and at least two sides with the
following minimum information:
- Supplier's name and address
- Quantity
c. Manufacturing date
d. Lot number
e. Order number
2.2 Or use the customization mark according to Customer
D. Storage Requirements
The products must be stored upon receipt from the supplier within
the original closed container, in a clean dry, well-aired store,
away from direct sunlight, humidity and sources of contamination or
foreign door and insect.
E. Certificate of Analysis
•Manufactured date, lot number, quantity , materials
•Includes measured visual inspection, key function test, and
critical dimension measurement result.
