ST01 Bimetallic Thermostat ST11 Thermostat ST06 Temperature
Protector Temperature Controlled Switch
BW & BH series that can protect against over-current and
over-temperature are sealed firmly, small internal resistance, no
noise and reset automatically. When current through bimetal that
are sensitive to temperature and current, the status of the bimetal
will be changed by over-temperature or over-current to cut off
circuit or switch on circuit. BH series are safer than normal
protectors, as there is no temperature effect lag under condition
of sudden big current.
ST01temperature protector Specification
Electrical Rating:
| Electrical Rating | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V max 16A |
| Open temperature | (30~150)±5°C; 5°C a step |
| Reset temperature | 2/3 of the action temperature with tolerance of ±15°C. Reset
temperature can also be provided according to customers'
requirement. |
| Life times | 10000 times |
| Size | L15mm W7.1mm H3.8mm |
| Lead wire | #22 3266, end half tripping, length is 70mm, or according to
customer’s require |
| UL File no | E487478 |
| CQC certificate no | CQC16002142880 |
| TUV certificate no | B160592241002 |
ST01series thermal protector’s Dimension
| Model | Case | Length(mm) | width(mm) | High(mm) | Vol.&Current | Lead wire |
| H20 | Plastic | 18.5 | 8 | 4 | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V max 10A | #20 3135, end 5mm half tripping, length is 70mm, or according to customer’s require |
| H21 | Metal | 18.5 | 7.3 | 3.8 |
| H21 | Metal | 20 | 8 | 4 | AC250V 20A | #16 3135 |
| BH-A1D | Metal | 15 | 6.6 | 3.2 | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V | #20 3135, #22 3266,#22 3135, end 5mm half tripping, length is 70mm, or according to customer’s require |
| BH-B2D | Plastic | 15 | 7.1 | 3.8 |
| BH-TB02B-B8D | Plastic | 15 | 5.2 | 2.4 | DC-12V max 4A; DC-24V max 3A; AC-125V max 3A; AC-250V max 2A | 3266-AWG24#, 3135-AWG24# or nickel strip normally, length is 70 mm
or according to customer’s require |
ST01 temperature protector Application and Instruction
ST01temperature protector ,effective reliable security protector
and alarm devices, are widely used in various types 1.5 horsepower
motors, temperature protector, inverter welding machine, switch
power,temperature protector, fluorescent lamp ballasts, temperature
protector, electric appliances and other electric equipment to
prevent from over-current & over-heating caused by abnormal work
status. Enforced types that can withstand pressure of 3.5MPa are
fit for build-in-installation of plastic coated motor.
| Code | Temperature | Code | Temperature |
| 30 | 30℃ | 100 | 100℃ |
| 35 | 35℃ | 105 | 105℃ |
| 40 | 40℃ | 110 | 110℃ |
| 45 | 45℃ | 115 | 115℃ |
| 50 | 50℃ | 120 | 120℃ |
| 55 | 55℃ | 125 | 125℃ |
| 60 | 60℃ | 130 | 130℃ |
| 70 | 70℃ | 135 | 135℃ |
| 75 | 75℃ | 140 | 140℃ |
| 80 | 80℃ | 145 | 145℃ |
| 85 | 85℃ | 150 | 150℃ |
| 90 | 90℃ | | |
BW series
thermostat / KSD9700 thermal
protector / BW9700
temperature protector
H20,H21 series
thermostat’s Principle and structure
H20,H21serial universal and enhanced protectors with large metal
casing are composed of the thermal conductive metal casing,
bimetallic parts welded with silver alloy contact point, conductive
bracket, insulation fixation stand, fixed contact strip and heat
resistance cable. In case of abnormal operation, along with the
increase of the environment temperature to the set value, the
bimetallic parts perform quick action, open the contact point, and
disconnect the circuit. When the device is cooled to the
temperature for safe operation, the contact point will
automatically closes and recover normal operation.
H20,H21series
thermal protector’s Specification
| Electrical Rating | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V max 16A |
| Open temperature | (30~150)±5°C; 5°C a step |
| Reset temperature | 2/3 of the action temperature with tolerance of ±15°C. Reset
temperature can also be provided according to customers'
requirement. |
| Life times | 10000 times |
| Contact Closure resistance: | ≤50mΩ |
| Insulation resistance: | ≥100mΩ |
| Electric strength: | - AC1500V/1min free from phenomena of break down and flashover.
|
| UL File no | E487478 |
| CQC certificate no | CQC16002142880 |
| TUV certificate no | B160592241002 |
H20,H21series
thermal protector’s Dimension
| Model | Case | Length(mm) | width(mm) | High(mm) | Vol.&Current | Lead wire |
| H20 | Plastic | 18.5 | 8 | 4 | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V max 10A | #20 3135, end 5mm half tripping, length is 70mm, or according to customer’s require |
| H21 | Metal | 18.5 | 7.3 | 3.8 |
| H21 | Metal | 20 | 8 | 4 | AC250V 20A | #16 3135 |
| BH-A1D | Metal | 15 | 6.6 | 3.2 | DC-12V max 12A; DC-24V max 10A; AC-125V max 8A; AC-250V | #20 3135, #22 3266,#22 3135, end 5mm half tripping, length is 70mm, or according to customer’s require |
| BH-B2D | Plastic | 15 | 7.1 | 3.8 |
| BH-TB02B-B8D | Plastic | 15 | 5.2 | 2.4 | DC-12V max 4A; DC-24V max 3A; AC-125V max 3A; AC-250V max 2A | 3266-AWG24#, 3135-AWG24# or nickel strip normally, length is 70 mm
or according to customer’s require |
H20,H21series temperature protector’s Application
H20,H21series is applicable to chargeable battery, ballast,
massager, micro motor, transformer, electric tools, heat electric
appliance and instrument etc.
The product UL,CQC,TUV and RoHS certification approval.
