Wood factory industrial dust removal equipment is used in
woodworking workshop,
grinding workshop, paint workshop and other environments,
specifically to remove
the sawdust, paint dust and other particles produced during the
processing of the
device. It is mainly composed of pipeline system, fan system and
filtration system,
through the principle of negative pressure suction, the air
containing wood particles
is transported to the filtration system, and clean gas is filtered
out.
Classification of woodworking dust collectors
Woodworking dust collector can be divided into indoor dust
collector and outdoor
dust collector according to the device mode. The indoor dust
collector comprises
a common bag type vacuum cleaner and a pipe type filter; The
outdoor dust collector
includes the straight drop dust collector and the pulse module dust
collector. In addition,
according to the dust removal method can also be divided into
positive pressure dust
removal and negative pressure dust removal.
Wood factory industrial dust removal equipment is based on suction
under negative
pressure. The pipeline system is connected to the woodworking
machinery and the
filtration system, and the fan works to produce negative pressure
in the pipeline, thereby
inhaling wood chips, dust and other particles into the pipeline. In
the filtration system,
when the air flow passes through the diversion bin of the bag
filter, the flow rate is reduced,
the heavier wood particles fall into the ash bin under the action
of gravity, and the lighter
and fine dust is adsorbed on the outer surface of the filter bag.
With the continuous filtration
condition, the dust on the outer surface of the filter bag
gradually increases, and the system
resistance increases. At this time, the automatic pulse cleaning
device starts, and the filter
bag is cleaned by pulse amplitude and frequency set by the pulse
controller to maintain
the dust removal efficiency.
| Equipment type | DMC-500 | Material: carbon steel or stainless steel |
| Filter area | 400m2 | |
| Dust collector cloth bag | 500PCS | Polyester needle felt covered |
| Dust collector bag cage | 500PCS | 8 bars 3.5 wire surface spray treatment |
| Electromagnetic pulse valve | 50PCS | 24V |
| Star discharger | 2PCS | Material: Cast iron 1.5KW |
| Inlet size | 800 | |
| Dust collector fan | 1PCS | 45KW |
| Equipment dimensions | 8580mm×1780mm×5500mm |
