DMC-96 type single pulse dust collector box is generally welded
from carbon steel, and the
thickness of the plate can be 3mm4mm5mm to meet different pressure
strengths. dmc-96
pulse bag type dust collector box sealing performance is
particularly good, simple structure,
convenient installation of filter bag, the use of upper suction
bag, as long as the skeleton is
pulled out, the dirty bag is thrown into the ash bucket, there is
an entry hole to remove, while
installing a new filter bag (polyester needle felt).
Working principle of single pulse dust collector: Under the action
of the main fan of the system,
the dust-containing gas enters the box from the inlet of the dust
collector, and the coarse dust
particles fall directly into the bin under the action of inertia
and self-weight, which plays the role
of pre-collecting dust. Other lighter dust is blocked on the outer
surface of the filter cartridge
with the air flow, and the filtered purified gas is discharged by
the air after the box. With the
continuous filtration conditions, more and more dust accumulates on
the outer surface of the
filter bag, and the resistance of the equipment will also increase
(generally set to 1500PA).
In order to ensure the continuous normal operation of the system,
the pulse valve will be
periodically sprayed by the controller to clean the ash. The
injection time and cycle can be
set and adjusted according to the actual needs of customers through
the pulse controller.
See the controller manual for details.
| Equipment type | DMC-96 | Material: carbon steel or stainless steel |
| Filter area | 51.2m2 | |
| Dust collector cloth bag | 96PCS | Polyester needle felt covered |
| Dust collector bag cage | 96PCS | 8 bars 3.5 wire surface spray treatment |
| Electromagnetic pulse valve | 12PCS | 24V |
| Star discharger | 1PCS | Material: Cast iron 1.5KW |
| Inlet size | 500 | |
| Dust collector fan | 1PCS | 7.5KW |
| Equipment dimensions | 2120mm×1440mm×4500mm |
