Explosion-Proof Vacuum Homogenizer Mixer Manual Pouring And
Batching Electric Heating
Emulfiyfing mixer is designed for cosmetic and pharmaceutical
industry .the most advantage is :
1..down homogenizer provide the power torque for higher viscosity
material product mixing effection.
2 the cap of main pot could be lifed flexibly . for more easy to
clean the pots and mixer .
3. the discharge material method has three optional for operators
Perfomance & feature :
1.Compsite scraper impeller is for all kind of complex formual .
optimizing energy efficiency
2.Ptfe scraper caters to agitation tank. scraping the pot wall
effiently
3.Bottom homogenizer offer the power of motor thoroughly and more
powerful
4. motor with best balanced isotactic curve and stator could
realize high energy shear fluild .grinding centrifuagal .ensure
paste is exquisite .smooth . pot body and pipe surface mirror
polishing 300mesh
5.Homogenizer with frequency control motor speed is optional , can
reach at 4500rpm
Specific parameter requirements of emulsifier:
| 10L emulsifying pot | Specific parameters |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching water phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching oil phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Design capacity | 10L |
| Working capacity | 8L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Service life | Over 10 years |
| Homogenizer power | 0.55 KW |
| Homogenizer speed | 2800 |
| Homogenization mode | Upper homogenization |
| Lid opening method | Manual or electric |
| Heating method | Electric heating |
| Discharge method | Inclined discharge |
| Sandwich operating pressure | 0.3 MPa |
| Vacuum degree in the pot | -0.09 MPa |
| Overall dimensions (m) | 0.8*0.55*1.43 |
| Wearing parts | 1 year spare parts. spare parts |
| Warranty Period | More than 1 year |
| Installation and | The supplier is responsible for commissioning |
| Matching water phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Sandwich operating pressure | 0.3 MPa |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Down stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
| Matching oil phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Upper (lower) stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline
installation drawings. When the equipment needs maintenance, the
buyer shall notify the supplier in writing, and the supplier will
arrive within 2 days after receiving the notice to ensure timely
after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300
mesh, equipment size:
6. Various pipelines are required to be made of stainless steel
(316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
We have a variety of packaging methods for customers to choose:
vacuum wood packing, ordinary wood packing, frame packing, etc.,to
meet the different needs of customers
The long-term export trade has enabled our team to have rich
experience in loading cabinets: high cabinets, low cabinets, open
top cabinets, flat cabinets, etc., can be easily completed
