Product Description:
YA-D400 series point type gas detectors are commonly utilized in
various hazardous environments such as chemical plants, petroleum
refineries, metallurgical operations, liquefied gas stations,
painting facilities, gas transmission hubs, and distribution
centers. These detectors are designed to detect toxic and
combustible gases that are typically generated or stored in indoor
and outdoor locations that are prone to gas leakage.
Developed by our company, YA-D400 series point type gas detector is
a highly practical and user-friendly device that can be easily
operated. It can also be integrated with our gas alarm controller
YA-K series to create an industrial gas alarm system. The product
can be installed using a wall-mounted design that is suitable for
tube type, scaffolding type, ceiling type installations. Through
the use of the controller, the single-chip microcomputer can upload
the data of the gas detector for various data processing tasks, and
ultimately accomplish the tasks of data display, output control,
and other functions.
Technical Parameters:
| Class of protection | IP67 |
| Material | Die-casting Aluminum |
| Dimension | 205*209*84mm |
| Power supply and power | Power Supply 24V; Combustible: ≤4W; Oxygen/Toxic: ≤3W |
| Installation Method | Pipeline Type Wall Mounting Type |
| Output Signal | 4-20 MA, Modbus |
| Output signal | 4-20m Acurrent Signal, Corresponding To Full Scale |
| Gas Unit | PPM, Mg/m3, Vol%, LEL% |
| Sensor type | Combustible: Catalytic Combustion Type; Toxic: Electrochemical Type
(imported Sensor) |
| Minimum reading | Combustible: 1% LEL; Toxic: 0.1μmol/mol(determined By Sensor) |
Stationary Gas Sensor, Stationary Gas Sensor, Gas Monitor
Applications:
With a minimum reading of 1% LEL for combustible gases and
0.1μmol/mol for toxic gases (determined by sensor), the YA-D400 is
highly sensitive and accurate, ensuring the safety of workers and
equipment. The gas unit can be set to PPM, Mg/m3, Vol%, or LEL%,
depending on the specific gas being monitored.
The YA-D400 is powered by a 24V power supply and has low power
consumption, with a maximum power requirement of ≤4W for
combustible gases and ≤3W for oxygen/toxic gases. This makes it an
energy-efficient choice for long-term use in industrial settings.
Some common application occasions and scenarios for the YAOAN
YA-D400 Fixed Gas Detector include:
- Oil and gas refineries
- Chemical plants
- Power generation facilities
- Pharmaceutical manufacturing plants
- Food and beverage processing facilities
- Mining operations
- Wastewater treatment plants
In these settings, the YA-D400 can be used to detect a wide range
of gases, including methane, propane, CO, H2S, SO2, and more. It
can also be used to monitor oxygen levels, ensuring the safety of
workers in confined spaces where oxygen levels may be low.
Overall, the YAOAN YA-D400 Fixed Gas Detector is a reliable and
versatile industrial gas detector that can help keep workers and
equipment safe in a variety of scenarios. Its high sensitivity,
accuracy, and low power consumption make it an excellent choice for
long-term use in hazardous environments.
Support and Services:
The Fixed Gas Detector product comes with the following technical
support and services:
- 24/7 technical support
- Product installation and commissioning
- Product training
- Calibration and maintenance services
- Repair and replacement services
- Warranty and post-warranty services
