Product Description
FPV Drone Kit 15-Inch carbon fiber Payload 7.5kg thermal imaging
racing drones
This 15-inch FPV kamikaze drone features a high-performance carbon
frame and a powerful 4214 380KV motor. With a payload capacity of
7.5kg, it offers 8-15 minutes of flight time with load and up to 25
minutes without load. It boasts a 10km range, 120km/h max speed,
and 5000m altitude. It's designed for serious aerial tasks and has
a 16000mAh battery, F722 flight controller, and 5.8GHz video
transmission. The drone supports a wide range of accessories,
including a 1500TVL camera, 80A ESC, and durable HQProp 15x7x3
blades
Product Parameters
| ZAi-PS15 Product Specification 15-inch fpv kamikaze drone |
| 15-inch Carbon Frame | Motor 4214 380KV |
| Attribute | Value | Attribute | Value |
Frame Dimension | L52*W52*H25 cm | Operating Rated Voltage | 6-8S |
Wheelbase | 70cm | Motor Weight | 246g |
Carbon Plate Material | T300/T700 | Maximum Thrust | 4850g |
Camera Spacing | 2cm | Maximum Power | 1760 W |
Stack Mounting Hole | M3*30.5mm | Maximum Current | 60A |
VTX Mounting Hole | M2*20/25.5mm M3*30.5mm | Phase Resistance | 48mΩ |
| Flight Control F722 | ESC 80A 8S |
| Attribute | Value | Attribute | Value |
BEC | 5V2A ,9V2A | Input Voltage | 8S |
Input Voltage | 12-50V(3-6S Lipo Recommended) | Continuous Current | 80A |
Firmware | Betaflight | Mounting Hole Spacing | 30.5*30.5mm |
Mounting Hole Spacing | 30.5mm/M3 | Weight | 28g |
| Camera 1500TVL | VTX 5.8G 40CH 2.5W |
Image Sensor | 1 / 3′CMOS | Supported Voltage | 7-28V |
| lens | 2.1mm | Antenna Interface | MMCX |
Power Supply | DC 5V-30V | Mounting Holes | 20X20.M2 |
Pixels | 1500 TVL | Output Power | PIT / 25 / 2500mW |
Antenna | 5.8G RHCP 150MM |
| RX | ELRS 915MHz |
| propeller | HQProp 15*7*3 |
Product Advantages- Carbon Fiber Frame: high-strength carbon fiber to reduce weight and improve body
stability, allowing it to work in a variety of environments
- Large payload up to 7.5kg
- High-Precision And Extremely Fast Flight: super strong power and strong fuselage, with 10inch blade, flight
speed up to 30 m/s, built-in M10 high precision GPS chip, and
accurate positioning, so that it is both fast and accurate
- Antenna 5.8G RHCP 150mm: It is made of imported PC+ABS material which can withstand
high-strength impact, Impact-resistant double-sheathed semi-rigid cable, Root reinforcement design, and
360 ° protection.
Product Application
flying enthusiasts, aerial photographers, projects, Israel
military, army, DJI dealers, distributors, remote control
companies, RC car companies, sports camera dealers, 3-axis
hand-held gimbal agents, consumer electronics companies,
supermarkets, online offline stores, physical shops, etc.
