Vacuum induction melting furnace
Vacuum Melting Furnace 100kg-500kg Induction Furnace for Vacuum
Induction Melting Advanced Technology
1,Description and main technical indicators of vacuum induction
melting furnace
AE-ZK-1.0L periodic vacuum induction melting furnace is mainly used
for medium-frequency induction heating of various high-temperature
alloys, iron-based, nickel-based alloys, cobalt-based alloys and
certain non-ferrous metals and their alloys under vacuum or inert
gas protection. Melting, smelting, casting and molding are carried
out according to the principle.
,The furnace has a vertical structure. The smelting chamber and the
ingot mold chamber are in the same room. Before smelting, the ingot
mold is placed in the furnace chamber. After the smelting is
completed, the smelted molten steel is poured into the mold through
the observation window. After cooling, , break the vacuum, open the
side furnace door and take out the cast ingot mold. Start the next
batch of work to achieve cycle production
2. Main Specifications:
Smelting furnace technical parameters:
Rated capacity of electric furnace: 1000kg
Smelting environment: vacuum or inert atmosphere state.
Melting working temperature: 1600-1700℃
High temperature: 1750-2000℃ depending on crucible material
Ultimate vacuum pressure≤6.67X10-2Pa
Working vacuum degree ≤6.67X10-1Pa
Air leakage rate ≤50Pa/S
Empty time ≤50 minutes
Maximum loadable power: 600KW
Melting frequency: 1000Hz
Average melting speed (power delivery from full material to
complete melting): 1000Kg/1-1.5h
Temperature measurement range: 1000-1800℃
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's
plant.During the installation and commissioning period, the
commissioning personnel shall be provided free of charge by the
demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts
from the date of installation and debugging of the supplier.
Equipment failure happens, after-sales service personnel shall give
solutions within 2 hours, after receiving the buyer's notification
. If it is need to go to the site for treatment , operators
dispatched by seller should arrive at the site within 48 hours
after go aboard. In case of emergency,operators should arrive at
the site within 48 hours after go aboard, and continue to make
repairs until the fault is removed and the equipment returns to
normal.
