JZP Series
As early as the 60s of the 20th century, the concept of shock
absorption has been introduced into the construction of buildings,
water conservancy and mining. Contact stresses, friction, and
vibration attenuation of temporary and fixed structures have a
profound impact on the stability performance of buildings and
facilities.
In view of the diversity of damping principles and the arduousness
of analyzing the stress and deformation states at the joints of
components, it is quite challenging to mathematically model the
damping phenomena of structures.
At present, this kind of JZP-4.2 shock absorbing equipment is
widely used in high-end medical instrument systems, deep-sea
exploration, submarines, on-board electronics, control cabinets,
etc.
In the field of on-board electronics, JZP-4.2 shock absorbers are
also widely used. Modern cars are equipped with a large number of
electronic devices, such as on-board computers, premium audio
systems, etc. During the driving process, the car will be
constantly affected by the vibration caused by road bumps,
acceleration and deceleration. These vibrations can be very
detrimental to the service life and performance of on-board
electronics. The KLP-5.3 damping device provides effective damping
protection for on-board electronics according to the vibration of
the car while driving. For example, when a car is driving on a
rough road, the shock absorber responds quickly and reduces the
impact of vibration on the electronics.
With the continuous development of science and technology, the
requirements for shock absorbers are also increasing. In the
future, JZP-4.2 shock absorber is expected to make greater
breakthroughs in intelligence and adaptation to adapt to more
complex working environments and more sophisticated equipment
needs.
Structure Drawing
Technical Parameter Table
| Technical Parameter | JZP-5.0B | JZP-3.2 | JZP-5.2 | JZP-7.5 |
| Pz Nominal Load (kg) | 5.0 | 3.2 | 5.2 | 7.5 |
| Deflection | Downward Pressure |
| Deformation Displacement (mm) | ≤0.3 |
| Resonant Frequency (Hz) | 35±3 |
| Working Temperature (℃) | -45～+65 |
| Shock (Ks) | 100g6ms |
| Peak Response G | ≤3.6Kms2 |
| Vibration (Kv) | Accord with National Military Standard GJB150-16 |
Impact & Vibration Curve
* Unique Characteristics of Xi'an Hoan's Vibration Isolators *
* No creep or ageing.
* High internal damping.
* Very wide temperature range.
* Wide variety of possible fittings.
* Rapid and economical prototyping.
* Extremely rugged construction and long lifespan.
* Excellent combined shock and vibration isolation.
* Not affected by chemical agents, seawater, ozone, UV rays
