Product Description:
FTTA Series FO Cable Assemblies with LC Uniboot connectors and
protective harmonic boot
These assemblies are intended to connect remote radio modules
(RRU/RRH) to Nokia cellular base stations. The LC-Uniboot connector
has a compact design and change polarity feature, making it a
reliable and secure connection solution.
The assembly is made up of a compact cable with a jacket made from
thermoplastic UV-stabilized halogen-free compound, providing
reliable protection against precipitation and long-term exposure to
UV radiation. Additionally, it can perform in a wide temperature
range, a crucial feature for outdoor equipment.
The LC-Uniboot connector is installed directly to the outer jacket
of the optical cable, together with the flexible harmonic boot.
This combination provides a reliable water and dust-sealed
connection to outdoor Nokia equipment. The absence of fanouts in
the design provides simplicity and reliability, especially during
temperature changes.
Overall, the FTTA Series FO Cable Assemblies with LC Uniboot
connectors and protective harmonic boot are an excellent choice for
those who require a secure and reliable connection to their outdoor
Nokia equipment.
Features:
- Easily add/install jumper cables for a future expansion.
- Low insertion loss and added loss.
- Height of attenuation.
- Flexibility with small bending radius and excellent cable routing
properties. 5.End-face geometry and quality superior than IEC and
Telcordia standards.
- The material in the jumper cable are all-weather and UV-resistant.
IP67 water and dust protection.
- Mechanical performance: IEC 61754-20 standard. 9.RoHS and REACH
materials compliant.
Technical Parameters:
NSN Boot DLC Connector Type
| Type | Reference | Note |
LC |
IEC 61754-20 |
Single mode duplex | APC: Green connectors
UPC: Blue connectors |
| Multimode duplex | UPC: Grey Connectors |
Dimension and diagrams
NSN Boot 180°duplex LC patch cord
NSN boot 90°duplex LC Fiber Optic Jumper
NSN Boot DLC Patch Cord Tolerance Requirement
| Overall length (L) (M) | length of tolerance(CM) |
| 0＜L≤20 | +10/-0 |
| 20＜L≤40 | +15/-0 |
| L＞40 | +0.5%L/-0 |
4 Types of Cable for NSN Boot
Cable Parameters:5.0mm
Cable Count |
Out sheath Diameter (MM) |
Weight (KG) | Minimum allowable Tensile Strength (N) | minimum allowable Crush Load (N/100mm) | Minimum Bending Radius (MM) |
Storage temperature (℃) |
| short term | long term | short term | long term | short term | long term |
| 2 | 5.0±0.2 | 30 | 800 | 400 | 2000 | 1000 | 20D | 10D | -20 ~~ +70 |
Cable Parameters:5.0mm SUS spiral armored
Cable Count |
Out sheath Diameter (MM) |
Weight (KG) | Minimum allowable Tensile Strength (N) | minimum allowable Crush Load (N/100mm) | Minimum Bending Radius (MM) |
Storage temperature (℃) |
| short term | long term | short term | long term | short term | long term |
| 2 | 5.0±0.2 | 45 | 400 | 800 | 2000 | 3000 | 20D | 10D | -20~~+70 |
Customization:
The Fiber Optic Patch Cord, also known as Fiber Patch Cable or
Fiber Optic Cable Connectors, is available in simplex or duplex
with a PE or LSZH sheath. The connector type is SC APC and the
storage temperature ranges from -40°C to +85°C.
Can be support OEM lable, logo...
Packing:
